192.168.1.98 router login
To open the admin panel, type 192.168.1.98 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
192.168.1.98 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
No login pair exists in the record for 192.168.1.98, so none is stated here. Because no particular vendor is associated with this address, the defaults depend entirely on the device answering it. Check the label on the underside or rear of the unit, the quick-start card in the box, or the manufacturer's published manual for the model.
How to log in to your router
Type 192.168.1.98 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 192.168.1.98, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
Without the current password, the practical option is a factory reset, typically the recessed button held for several seconds while powered on. Everything configured is lost: forwarded ports, address reservations, guest and IoT networks, schedules and access rules. The wireless SSID and key fall back to the label defaults, so reconnect every device once the unit finishes rebooting.
192.168.1.98 comes from 192.168.0.0/16, the private range described in RFC 1918. Masked at 255.255.0.0 it spans 65,536 addresses, and because that space is unallocated it says nothing about geography, ownership or provider; it only describes a slot on a local network. This is the consumer block. Nearly every home router, mobile hotspot and small office access point ships a default gateway inside it, which is why it is the range most people encounter.
Inside the block the relevant subnet is 192.168.1.0/24. Its usable addresses stretch from 192.168.1.1 to 192.168.1.254, with 192.168.1.255 reserved for broadcast. Host number 98 is not a typical gateway position, so an address here is far more often leased to a client, a network printer, an IP camera, a games console, than assigned to the router itself. Most visitors are trying to identify an unexpected device or reach an admin panel they were told lives at this address. Another 254 addresses in this subnet have their own entries.
Whois information for 192.168.0.0/16
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 192.168.0.0 - 192.168.255.255
CIDR: 192.168.0.0/16
NetName: PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle: NET-192-168-0-0-1
Parent: NET192 (NET-192-0-0-0-0)
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1994-03-15
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/192.168.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 192.168.1.0/24
The 192.168.1.0/24 subnet runs from 192.168.1.1 to 192.168.1.254, with 192.168.1.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
255 addresses in this subnet have a page; the most looked-up are listed here.