10.10.10.10 router login

http://10.10.10.10 ↗

To open the admin panel, type 10.10.10.10 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

10.10.10.10 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

There are no documented default username and password pairs for 10.10.10.10. That is expected, since credentials belong to a device rather than to a private address that any network can reuse. The defaults for whatever is answering here are printed on the device itself: check the label on the underside or rear panel, which on many devices lists the management address alongside the initial sign-in details. Failing that, consult the printed or downloadable manual for the exact model, or, if the equipment was supplied by an internet provider, the provider's own setup documentation, which sometimes overrides the manufacturer defaults.

How to log in to your router

  1. Type 10.10.10.10 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 10.10.10.10, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

No specific vendor is known to ship 10.10.10.10 as a default gateway address, so there is no single documented reset procedure to give. If the credentials have been changed and are not recoverable, first try the manufacturer's or provider's account recovery path, and check whether a colleague or administrator holds the current details, since an address in this position is often a managed device rather than a home router.

A factory reset is the last resort. It commonly clears the network name and passphrase, port forwarding, static routes, DHCP reservations and any provider-specific provisioning, which may then need to be restored by the provider. Identify the device model and follow its documented reset method before pressing anything.

10.10.10.10 is a private IPv4 address from 10.0.0.0/8, the largest of the three RFC 1918 ranges. With a netmask of 255.0.0.0, the block spans 16,777,216 addresses and is not routable on the public internet. That size is the reason it turns up where it does: corporate and campus networks, ISP-managed customer premises equipment, carrier-grade gear, VPN address pools and container or orchestration networks all draw from it, and all of them subnet it far below /8. Because the space is private, the same address is in use on countless unrelated networks at the same time, and no location, ISP or owner can be attached to it.

Within that block, 10.10.10.10 sits in the 10.10.10.0/24 subnet, whose usable range is 10.10.10.1 through 10.10.10.254 with 10.10.10.255 reserved as the broadcast address. It is the tenth host position. Gateways are more often placed at .1 or .254, so an address at .10 is more commonly a fixed host: a server, an access point, a management interface, or an appliance given a static address inside a planned range.

Most people who look this address up have found it in a browser bar, a router status page, an ARP or DHCP table, or a configuration file, and want to know what is answering on it and how to log in.

Block10.0.0.0/8
Netmask255.0.0.0
Subnet10.10.10.0/24
Usable10.10.10.1 – 10.10.10.254

Whois information for 10.0.0.0/8
#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent:  ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

Other documented addresses in 10.10.10.0/24

The 10.10.10.0/24 subnet runs from 10.10.10.1 to 10.10.10.254, with 10.10.10.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.

Most looked up in this subnet

10.10.10.3 10.10.10.120 10.10.10.7 10.10.10.2 10.10.10.1 10.10.10.100 10.10.10.71 10.10.10.12

All addresses we cover here
10.10.10.1 10.10.10.2 10.10.10.3 10.10.10.4 10.10.10.5 10.10.10.6 10.10.10.7 10.10.10.8 10.10.10.9 10.10.10.11 10.10.10.12 10.10.10.13 10.10.10.14 10.10.10.15 10.10.10.16 10.10.10.17 10.10.10.18 10.10.10.20 10.10.10.22 10.10.10.23 10.10.10.24 10.10.10.40 10.10.10.47 10.10.10.50 10.10.10.61 10.10.10.70 10.10.10.71 10.10.10.72 10.10.10.77 10.10.10.80 10.10.10.81 10.10.10.85 10.10.10.90 10.10.10.91 10.10.10.96 10.10.10.100 10.10.10.101 10.10.10.108 10.10.10.117 10.10.10.120 10.10.10.123 10.10.10.125 10.10.10.126 10.10.10.150 10.10.10.154 10.10.10.176 10.10.10.192 10.10.10.200 10.10.10.201 10.10.10.202 10.10.10.214 10.10.10.229 10.10.10.234 10.10.10.243 10.10.10.245 10.10.10.246 10.10.10.248 10.10.10.249 10.10.10.250 10.10.10.254

180 addresses in this subnet have a page; the most looked-up are listed here.