10.10.10.108 router login

To open the admin panel, type 10.10.10.108 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

10.10.10.108 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

No credential pair is documented for this address, and guessing at one for a 10.x host would be irresponsible given how often such addresses sit on managed networks. If a login prompt appears, the device's own factory defaults apply: consult its label, its packaged documentation, or the vendor's model-specific manual. On corporate equipment, defaults are frequently replaced during provisioning, so ask whoever administers the network.

How to log in to your router

  1. Type 10.10.10.108 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 10.10.10.108, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

Password recovery on managed hardware normally starts with the administrator rather than the reset button, since many organisations hold credentials centrally. Where a reset is sanctioned, expect the device to return to factory defaults: VLAN assignments, routing entries, certificates and access control lists are wiped, and on wireless equipment the SSID and key fall back to whatever the label states.

10.10.10.108 belongs to 10.0.0.0/8, the largest of the three RFC 1918 ranges, holding 16,777,216 addresses behind a 255.0.0.0 netmask. It is common in corporate and campus networks, ISP-managed CPE, carrier-grade equipment, VPN address pools and container or orchestration networks, where administrators subnet the space far below a /8. Seeing it therefore says more about how a network was designed than about who runs it.

Here the operative subnet is 10.10.10.0/24, with usable hosts from 10.10.10.1 to 10.10.10.254 and 10.10.10.255 as broadcast. Host number 108 sits comfortably inside the middle of a typical dynamic pool and is not a conventional gateway slot, so it usually identifies a workstation, server, access point or VPN client rather than the device performing routing. Most people looking it up are tracing a machine on a work, lab or virtualised network.

Block10.0.0.0/8
Netmask255.0.0.0
Subnet10.10.10.0/24
Usable10.10.10.1 – 10.10.10.254

Whois information for 10.0.0.0/8

#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent:  ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN