10.10.10.201 router login
To open the admin panel, type 10.10.10.201 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.10.10.201 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
No default username and password is on record for 10.10.10.201. Since 10.10.10.x is reused independently by countless networks, only the device answering on this address can supply its own defaults. Look at its label or chassis sticker, the setup leaflet that shipped with it, or the vendor's documentation for that model number. Some appliances instead force a password to be created on first login.
How to log in to your router
Type 10.10.10.201 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.10.10.201, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
If the password is unknown, check whether the device supports a recovery mode or a console login before reaching for the reset button. A factory reset returns it to shipping state, erasing the IP configuration that put it on 10.10.10.201 in the first place along with all rules and accounts, and restoring the label's Wi-Fi name and key on wireless models. Plan to reconfigure from scratch.
10.10.10.201 is drawn from 10.0.0.0/8, the private range set aside by RFC 1918. The block totals 16,777,216 addresses under netmask 255.0.0.0 and turns up in enterprise and campus networks, provider-managed customer equipment, carrier gear, VPN pools and container fabrics, subnetted far below its native size wherever it is used.
The surrounding /24 is 10.10.10.0, with usable addresses from 10.10.10.1 to 10.10.10.254 and broadcast at 10.10.10.255. The 10.10.10.x pattern is memorable to type, which is part of why it recurs so often in labs, test benches, appliance defaults and small office builds. Host 201 sits high in the range rather than at the gateway end, which on many networks means a statically assigned appliance or a device near the top of a DHCP scope. Most visitors are trying to reach a management interface they know lives here.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.10.10.0/24
The 10.10.10.0/24 subnet runs from 10.10.10.1 to 10.10.10.254, with 10.10.10.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
180 addresses in this subnet have a page; the most looked-up are listed here.