10.10.10.2 router login

http://10.10.10.2 ↗

To open the admin panel, type 10.10.10.2 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

10.10.10.2 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

No default username and password pair is documented for 10.10.10.2. That is expected: an IP address is only a location on a network, and the credentials belong to whatever device currently holds it, so no list can be accurate for a private address that anyone may reuse.

Identify the device first, then look up its own defaults. These are commonly printed on a label on the underside or rear of the unit, alongside the serial number and default network name. Failing that, check the quick-start guide, the manufacturer's support page for that exact model, or the documentation supplied by the ISP if the equipment was leased.

How to log in to your router

  1. Type 10.10.10.2 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 10.10.10.2, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

If the device answers on 10.10.10.2 but the login is unknown, first try any credentials recorded when it was installed, and check whether an administrator or the ISP holds them. A factory reset is the reliable fallback, but it is destructive: it clears the admin password along with wireless names and keys, port forwarding, static leases, VLANs, firewall rules and any custom addressing, which may itself move the device off 10.10.10.2.

The usual method is a recessed button held with a paperclip for roughly ten to thirty seconds while powered on. No specific vendor is known to ship this address, so confirm the exact procedure and timing in that model's manual before pressing anything.

10.10.10.2 is a private IPv4 address drawn from 10.0.0.0/8, the largest of the three RFC 1918 ranges. With a netmask of 255.0.0.0, that block spans 16,777,216 addresses, and it is not routable across the public internet. Any organisation may use it internally, and many do simultaneously, so the address carries no owner, registrant, ISP or location. The block is common in corporate and campus networks, ISP-managed CPE, carrier-grade equipment, VPN address pools and container or orchestration networks, where the space is almost always subnetted far below /8.

In practice 10.10.10.2 sits inside a /24 network, 10.10.10.0/24, whose usable range runs from 10.10.10.1 to 10.10.10.254 with 10.10.10.255 reserved as the broadcast address. It is the second usable host address in that subnet. The first address, not the second, is the conventional gateway position on most networks, so 10.10.10.2 is more often a server, access point, controller, secondary interface or a DHCP-assigned client than a router's LAN interface.

Most people arriving here have typed the address into a browser and reached nothing, or have found it in a DHCP lease list, an ARP table or a network diagram and want to know what answers there.

Block10.0.0.0/8
Netmask255.0.0.0
Subnet10.10.10.0/24
Usable10.10.10.1 – 10.10.10.254

Whois information for 10.0.0.0/8
#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent:  ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

Other documented addresses in 10.10.10.0/24

The 10.10.10.0/24 subnet runs from 10.10.10.1 to 10.10.10.254, with 10.10.10.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.

Most looked up in this subnet

10.10.10.3 10.10.10.120 10.10.10.7 10.10.10.1 10.10.10.100 10.10.10.71 10.10.10.10 10.10.10.12

All addresses we cover here
10.10.10.1 10.10.10.3 10.10.10.4 10.10.10.5 10.10.10.6 10.10.10.7 10.10.10.8 10.10.10.9 10.10.10.10 10.10.10.11 10.10.10.12 10.10.10.13 10.10.10.14 10.10.10.15 10.10.10.16 10.10.10.17 10.10.10.18 10.10.10.20 10.10.10.22 10.10.10.23 10.10.10.24 10.10.10.40 10.10.10.47 10.10.10.50 10.10.10.61 10.10.10.70 10.10.10.71 10.10.10.72 10.10.10.77 10.10.10.80 10.10.10.81 10.10.10.85 10.10.10.90 10.10.10.91 10.10.10.96 10.10.10.100 10.10.10.101 10.10.10.108 10.10.10.117 10.10.10.120 10.10.10.123 10.10.10.125 10.10.10.126 10.10.10.150 10.10.10.154 10.10.10.176 10.10.10.192 10.10.10.200 10.10.10.201 10.10.10.202 10.10.10.214 10.10.10.229 10.10.10.234 10.10.10.243 10.10.10.245 10.10.10.246 10.10.10.248 10.10.10.249 10.10.10.250 10.10.10.254

180 addresses in this subnet have a page; the most looked-up are listed here.