10.10.10.100 router login

http://10.10.10.100 ↗

To open the admin panel, type 10.10.10.100 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

10.10.10.100 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

No default username and password pair is documented for 10.10.10.100, and none should be guessed. Credentials belong to the device answering at the address, not to the address itself, and the same address is reused across countless unrelated networks.

Find the defaults on the device: most equipment prints them on a label on the underside or rear, near the serial number, or lists them in the printed quick-start guide or the manufacturer's online manual for that exact model number. If the unit was supplied by an internet provider or configured by an IT department, the defaults are often replaced during provisioning and documented separately.

How to log in to your router

  1. Type 10.10.10.100 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 10.10.10.100, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

If the interface at 10.10.10.100 rejects your credentials, first identify the device by model number, then check its own documentation before doing anything destructive. Since no vendor is known to ship this address by default, no single reset procedure applies; consult the manual for the hardware you have actually identified.

A factory reset is a last resort. It commonly wipes the configuration back to defaults, which can mean losing static addressing, wireless settings, port forwarding, VLANs, certificates and account data, and the device may no longer answer at 10.10.10.100 afterwards. On managed or provider-supplied equipment, ask the administrator or provider first.

10.10.10.100 is a private IPv4 address from 10.0.0.0/8, the largest of the three ranges set aside by RFC 1918 for private use. With a netmask of 255.0.0.0 the block spans 16,777,216 addresses, and none of them are routable across the public internet. Any organisation may use this address internally, and many do at the same time, so 10.10.10.100 identifies a device only within the network you are currently attached to. It carries no location, no owner and no service provider.

In practice /8 is almost never deployed flat. It is subnetted far below its natural boundary and shows up in corporate and campus LANs, ISP-managed customer equipment, carrier-grade network gear, VPN address pools and container or orchestration networks. Here the surrounding subnet is 10.10.10.0/24, which offers usable addresses from 10.10.10.1 through 10.10.10.254, with 10.10.10.255 reserved as the broadcast address.

At position 100 in that /24, this address sits in the middle of the range rather than at either end where gateways are usually configured. That pattern is consistent with a DHCP-assigned or statically pinned host: a server, an access point, a camera, a printer, a NAS or a management interface. Most people looking up 10.10.10.100 are trying to reach a web interface on it or work out which device on their network holds it.

Block10.0.0.0/8
Netmask255.0.0.0
Subnet10.10.10.0/24
Usable10.10.10.1 – 10.10.10.254

Whois information for 10.0.0.0/8
#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent:  ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

Other documented addresses in 10.10.10.0/24

The 10.10.10.0/24 subnet runs from 10.10.10.1 to 10.10.10.254, with 10.10.10.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.

Most looked up in this subnet

10.10.10.3 10.10.10.120 10.10.10.7 10.10.10.2 10.10.10.1 10.10.10.71 10.10.10.10 10.10.10.12

All addresses we cover here
10.10.10.1 10.10.10.2 10.10.10.3 10.10.10.4 10.10.10.5 10.10.10.6 10.10.10.7 10.10.10.8 10.10.10.9 10.10.10.10 10.10.10.11 10.10.10.12 10.10.10.13 10.10.10.14 10.10.10.15 10.10.10.16 10.10.10.17 10.10.10.18 10.10.10.20 10.10.10.22 10.10.10.23 10.10.10.24 10.10.10.40 10.10.10.47 10.10.10.50 10.10.10.61 10.10.10.70 10.10.10.71 10.10.10.72 10.10.10.77 10.10.10.80 10.10.10.81 10.10.10.85 10.10.10.90 10.10.10.91 10.10.10.96 10.10.10.101 10.10.10.108 10.10.10.117 10.10.10.120 10.10.10.123 10.10.10.125 10.10.10.126 10.10.10.150 10.10.10.154 10.10.10.176 10.10.10.192 10.10.10.200 10.10.10.201 10.10.10.202 10.10.10.214 10.10.10.229 10.10.10.234 10.10.10.243 10.10.10.245 10.10.10.246 10.10.10.248 10.10.10.249 10.10.10.250 10.10.10.254

180 addresses in this subnet have a page; the most looked-up are listed here.