192.168.0.11 router login

To open the admin panel, type 192.168.0.11 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

192.168.0.11 router passwords

One default username and password pair has been reported for devices answering on 192.168.0.11.

Username / Password Percentage
admin / admin 100%

One credential pair is reported for devices reached at 192.168.0.11, and it accounts for every report on record: the username admin with the password admin. No specific vendor is known to ship this address, so treat that pair as a common default rather than a guarantee for your particular hardware.

If it is rejected, take the defaults from the device itself — the label on its underside or rear panel, the printed setup guide, or the manufacturer's support page for the exact model. Any password set during installation replaces the factory value outright.

How to log in to your router

  1. Type 192.168.0.11 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 192.168.0.11, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

Where admin/admin fails and no documented alternative works, check first that you are on the same subnet and that the device has not been moved to another address since you set it up.

A factory reset, normally a recessed button held while the unit is powered, wipes the configuration back to shipping state. For a manually numbered device that includes the static address, so it will no longer answer on 192.168.0.11 and will either revert to a fixed default or request a DHCP lease. Expect to redo shares, print queues, camera settings or wireless configuration afterwards, and note the defaults before you begin.

If admin/admin does still work, change it immediately: a widely known default on a reachable device is an open door.

192.168.0.11 sits inside 192.168.0.0/16, the RFC 1918 range most closely tied to consumer networking. The block holds 65,536 addresses under mask 255.255.0.0 and is the one ordinary users encounter, since the overwhelming majority of home routers, mobile hotspots and small office access points default somewhere within it. As private space it is reused endlessly, so the address cannot be attributed to a provider, an organisation or a location.

The subnet in play is 192.168.0.0/24, the second most common home LAN after 192.168.1.0/24. Usable addresses run from 192.168.0.1 to 192.168.0.254, with 192.168.0.255 reserved for broadcast. Host 11 is not a gateway position — routers on this subnet almost always take .1 — but it is a popular manual assignment, low enough to sit under a DHCP pool that typically starts at .100 and easy to remember for a printer, a NAS, a camera or an access point.

Some 175 people a year search for this address, usually to reach the web interface of a device they configured there, or to identify a static host they found listed on their network.

Block192.168.0.0/16
Netmask255.255.0.0
Subnet192.168.0.0/24
Usable192.168.0.1 – 192.168.0.254

Whois information for 192.168.0.0/16

#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 192.168.0.0 - 192.168.255.255
CIDR: 192.168.0.0/16
NetName: PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle: NET-192-168-0-0-1
Parent: NET192 (NET-192-0-0-0-0)
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1994-03-15
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/192.168.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN