192.168.0.200 router login

To open the admin panel, type 192.168.0.200 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

192.168.0.200 router passwords

4 default username and password pairs have been reported for devices answering on 192.168.0.200, ordered by how often each one is seen.

Username / Password Percentage
admin / admin 25%
root / pass 25%
admin / password 25%
blank / blank 25%

No router vendor is known to ship 192.168.0.200 as a default gateway, so there is no manufacturer default login that can be attached to it with any confidence. The pairs reported most often for addresses in this block are admin/admin, root/pass and admin/password, each accounting for about a quarter of reports, with the remaining quarter being devices that had no login set at all. Treat those as starting guesses rather than answers. A device's own defaults are normally printed on a label on its underside or back, or listed in its manual or ISP setup sheet.

How to log in to your router

  1. Type 192.168.0.200 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 192.168.0.200, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

If nothing gets you in, a factory reset restores the built-in defaults, but it is not free: it clears the Wi-Fi name and passphrase, port forwards, static leases, firewall rules and any stored ISP connection details, and the device may come back on a different address than 192.168.0.200 once it requests a fresh lease. Because no specific vendor is documented for this address, follow the reset procedure in that device's own manual; on many units it is a recessed button held for roughly ten to thirty seconds while the device is powered on.

192.168.0.200 is a private IPv4 address inside 192.168.0.0/16, the range RFC 1918 reserves for internal networks. With a netmask of 255.255.0.0 the block holds 65,536 addresses, none of them routable across the public internet. The same address runs on countless separate networks at once, so it has no owner, registrant or location — it identifies only a host on whichever LAN you are attached to.

Networks usually carve the block into /24 segments, and this address falls in 192.168.0.0/24, running from 192.168.0.1 to 192.168.0.254 with 192.168.0.255 held as the broadcast address. 192.168.0.0/16 is the consumer range: nearly every home router, mobile hotspot and small office access point ships a default gateway inside it, which is why most people meet this range first. Position 200 sits high in the segment and is not a spot routers commonly take for themselves, so on many networks it is a DHCP lease or a manually pinned client — a printer, camera, NAS or second access point.

Someone typing this address into a browser is usually trying to reach the management page of whatever device holds it, or to work out which device that is; the router's DHCP client list is the quickest way to check.

Block192.168.0.0/16
Netmask255.255.0.0
Subnet192.168.0.0/24
Usable192.168.0.1 – 192.168.0.254

Whois information for 192.168.0.0/16

#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 192.168.0.0 - 192.168.255.255
CIDR: 192.168.0.0/16
NetName: PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle: NET-192-168-0-0-1
Parent: NET192 (NET-192-0-0-0-0)
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1994-03-15
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/192.168.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN