192.168.0.118 router login
To open the admin panel, type 192.168.0.118 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
192.168.0.118 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
No username and password pair is documented for 192.168.0.118, and none should be assumed. Because addresses in this part of the range are usually assigned dynamically, the device answering today may not be the one that answered last month. If the host does present a login page, the factory defaults will be printed on the equipment itself, typically on a sticker beside the model and serial numbers, and repeated in its setup guide. Devices set up through a phone app often use an account password rather than a device one.
How to log in to your router
Type 192.168.0.118 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 192.168.0.118, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
The quickest way to identify this host is the router's list of connected clients, which pairs the address with a hostname and hardware address. Once you know what it is, the manufacturer's documentation will describe how to regain access, and many consumer devices offer an app-based or account-based recovery that avoids a wipe entirely. A full factory reset erases pairings, saved networks and personal configuration, so a smart-home device may need to be re-enrolled from scratch afterwards.
Of all the private ranges, 192.168.0.0/16 is the one ordinary users meet most often, and 192.168.0.0/24 is its very first segment, so it appears on an enormous number of home and small-office networks. The parent block holds 65,536 addresses behind netmask 255.255.0.0 and is set aside for internal use only, meaning 192.168.0.118 is never routed across the internet and never identifies a particular organisation, subscriber or place.
Inside the segment, hosts occupy 192.168.0.1 through 192.168.0.254, with 192.168.0.255 reserved for broadcast. The 118th position is typical of an address given out automatically by the router's DHCP server, since many devices allocate leases from a pool starting around .100. In practice that usually makes this a client: a phone, a games console, a smart speaker, a television or a laptop that happened to be handed this number when it joined.
Most visitors are either trying to open a router page that actually lives elsewhere in the segment, or are working out which device on their own network is holding this address, often after spotting it in a connected-devices list.
Whois information for 192.168.0.0/16
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 192.168.0.0 - 192.168.255.255
CIDR: 192.168.0.0/16
NetName: PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle: NET-192-168-0-0-1
Parent: NET192 (NET-192-0-0-0-0)
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1994-03-15
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/192.168.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 192.168.0.0/24
The 192.168.0.0/24 subnet runs from 192.168.0.1 to 192.168.0.254, with 192.168.0.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
250 addresses in this subnet have a page; the most looked-up are listed here.