192.168.0.2 router login

To open the admin panel, type 192.168.0.2 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

192.168.0.2 router passwords

2 default username and password pairs have been reported for devices answering on 192.168.0.2, ordered by how often each one is seen.

Username / Password Percentage
admin / admin 50%
blank / blank 50%

No specific vendor is known to ship 192.168.0.2 as a default gateway address, so there is no manufacturer default set that can be attached to it with confidence. Reports for devices answering at this address split evenly between admin/admin and no login at all, meaning an interface that opens without prompting or one whose password was chosen during first-time setup. Try admin/admin only if it matches the device you have actually identified. Otherwise read the label on the unit itself, its manual, or the documentation supplied with an ISP-issued device.

How to log in to your router

  1. Type 192.168.0.2 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 192.168.0.2, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

A factory reset restores access, but it is not free. It clears the Wi-Fi network name and passphrase, port forwarding and firewall rules, static DHCP reservations, custom DNS entries and any PPPoE or ISP account details, so every client has to rejoin and the connection may need reprovisioning. With no vendor identified for this address, the general method applies: with the device powered on, hold the recessed reset button for roughly ten to thirty seconds until the indicator lights change, then wait for the reboot to finish. Expect the address to move as well, since a reset device commonly returns to the first address in its subnet and may stop answering on 192.168.0.2.

192.168.0.2 is a private IPv4 address from 192.168.0.0/16, the RFC 1918 range that spans 65,536 addresses under the netmask 255.255.0.0. Addresses in this block are never routed on the public internet and have no registrant, no ISP and no geographic location. The same address is in use on millions of separate networks simultaneously, so the only thing that identifies it is the network you are attached to when you type it. This block is the consumer range: nearly every home router, mobile hotspot and small office access point ships a default gateway inside it, which is why most people encounter a 192.168 address before any other private range.

Within its /24, 192.168.0.0/24, the usable host addresses run from 192.168.0.1 to 192.168.0.254, with 192.168.0.255 reserved as the broadcast address. 192.168.0.2 is the second usable address. Gateways more commonly occupy the first position, so .2 is often not the router itself. It tends to be the lowest address in a DHCP pool, a statically configured device such as a network printer, NAS, IP camera or access point, or a second router or modem sitting behind the primary one.

Most people reaching this page are trying to open a web interface at http://192.168.0.2 and are not certain which device answers there.

Block192.168.0.0/16
Netmask255.255.0.0
Subnet192.168.0.0/24
Usable192.168.0.1 – 192.168.0.254

Whois information for 192.168.0.0/16

#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 192.168.0.0 - 192.168.255.255
CIDR: 192.168.0.0/16
NetName: PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle: NET-192-168-0-0-1
Parent: NET192 (NET-192-0-0-0-0)
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1994-03-15
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/192.168.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN