10.0.1.106 router login
To open the admin panel, type 10.0.1.106 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.0.1.106 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
No factory username and password is on record for this address, and inventing one would help nobody. The device holding 10.0.1.106 carries its own: look for the label on its case, the card packed with it, or the credentials section of its manual. Where the hardware came from an internet or managed service provider, that provider's documentation or support line is the right source.
How to log in to your router
Type 10.0.1.106 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.0.1.106, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
Without the current password, most equipment offers only a factory reset — typically the reset button held down for a sustained period rather than tapped. Weigh the loss first: custom routing, DNS entries, port rules and account settings all disappear, and the wireless SSID and password return to whatever the label states. Some units let you export the configuration beforehand, which is worth doing if you can still sign in.
Sitting in 10.0.0.0/8, 10.0.1.106 draws on the biggest private range RFC 1918 defines — 16,777,216 addresses with a 255.0.0.0 netmask. That block is the usual choice for corporate and campus networks, ISP-managed customer equipment, carrier-grade systems, VPN address pools and container orchestration, all of which slice it into much smaller subnets. The relevant slice here is 10.0.1.0/24, offering hosts from 10.0.1.1 to 10.0.1.254 with broadcast at 10.0.1.255.
The third octet being 1 rather than 0 is a common way of separating a second segment — a different floor, site, VLAN or guest network — from the first. Within it, 106 is a mid-range host number of the sort DHCP hands out freely, not a position gateways usually occupy. Anyone reading this has most likely found the address in a lease list, an ARP table or a device's network settings and wants to know what kind of endpoint it points to. 210 further addresses in this subnet are covered individually.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.0.1.0/24
The 10.0.1.0/24 subnet runs from 10.0.1.1 to 10.0.1.254, with 10.0.1.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
211 addresses in this subnet have a page; the most looked-up are listed here.