10.0.1.67 router login

To open the admin panel, type 10.0.1.67 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

10.0.1.67 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

There is no known default login associated with 10.0.1.67. On networks built on 10.0.0.0/8, addressing is assigned locally and carries no relationship to any manufacturer, so publishing a username and password for this number would be a guess. If the address belongs to managed equipment, the credentials are more likely held by whoever administers the network than printed anywhere. For an unmanaged device you control, look for the factory login on the chassis label, in the bundled setup guide, or in the manufacturer's online documentation for that exact model.

How to log in to your router

  1. Type 10.0.1.67 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 10.0.1.67, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

Before resetting anything, confirm what 10.0.1.67 actually is. On a managed network, the fastest and least disruptive route is to ask the administrator, since access is often centralised rather than tied to a per-device password. A factory reset erases the entire configuration: interface addressing, routing, VLAN membership, access rules and monitoring settings all revert to defaults, which on a business network can take a segment down. Because no vendor is known for this address, use the reset method described in the documentation for that specific unit.

10.0.1.67 belongs to 10.0.0.0/8, the largest of the three RFC 1918 ranges, covering 16,777,216 addresses under the netmask 255.0.0.0. It turns up in corporate and campus networks, ISP-managed customer equipment, carrier-grade gear, VPN address pools and container platforms, nearly always subnetted far below /8 so that each department, site or service gets a manageable slice. Nothing in the number identifies an owner: the block is unallocated, so any organisation may number its internal hosts this way.

The slice containing this address is 10.0.1.0/24, usable from 10.0.1.1 through 10.0.1.254, with 10.0.1.255 acting as the broadcast address. Third-octet values that count upward from zero are a hallmark of a deliberate addressing plan, where 10.0.0.x, 10.0.1.x and their successors map onto separate VLANs, floors or roles. Position 67 within that subnet is not a gateway slot; it reads much more like a dynamically leased workstation or endpoint. A further 210 addresses in this /24 appear in our records.

Most people looking this up have seen the address in a connection log, a network scan or a device list and want to know which machine is behind it. That answer lives on the network itself, in the DHCP server's lease table or the switch's MAC address table.

Block10.0.0.0/8
Netmask255.0.0.0
Subnet10.0.1.0/24
Usable10.0.1.1 – 10.0.1.254

Whois information for 10.0.0.0/8

#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent:  ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

Other documented addresses in 10.0.1.0/24

The 10.0.1.0/24 subnet runs from 10.0.1.1 to 10.0.1.254, with 10.0.1.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.

Most looked up in this subnet

All addresses we cover here

211 addresses in this subnet have a page; the most looked-up are listed here.