10.0.1.70 router login
To open the admin panel, type 10.0.1.70 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.0.1.70 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
No default username and password pair is documented for 10.0.1.70, and none should be assumed. Credentials belong to the physical or virtual device holding the address, not to the address itself, which is private space any network may reuse. Look for the defaults printed on the device label or sticker, in its quick-start guide or manual, or in the documentation supplied with ISP-managed equipment. On a managed corporate, campus or hosted network, the login is usually set by an administrator and the defaults no longer apply, so ask whoever runs the network.
How to log in to your router
Type 10.0.1.70 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.0.1.70, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
Before resetting anything, confirm what the device at 10.0.1.70 actually is, and try the label, manual, administrator or ISP support route first. A factory reset is not a small step: it clears the running configuration, which on many devices means Wi-Fi network names and keys, port forwards, VLANs, firewall rules and any static or reserved lease that put the device at this address in the first place. ISP-managed hardware may then need re-provisioning. On most devices the reset is a recessed button held for several seconds while powered on, but the exact hold time and method vary, so follow the device's own documentation.
10.0.1.70 is a private IPv4 address inside 10.0.0.0/8, the largest of the three RFC 1918 ranges, covering 16,777,216 addresses under the netmask 255.0.0.0. Addresses in this block are not routable across the public internet and carry no registrant, owner, ISP or geographic location. The same address can exist on any number of unrelated networks at the same time, so 10.0.1.70 on one network has nothing to do with 10.0.1.70 on another. The block is common in corporate and campus networks, ISP-managed CPE, carrier-grade equipment, VPN address pools and container or orchestration networks, where it is subnetted far below /8.
The surrounding subnet is normally 10.0.1.0/24, with usable host addresses from 10.0.1.1 to 10.0.1.254 and 10.0.1.255 reserved as the broadcast address. As host number 70, this address sits well inside the host range rather than at the low or high edges where gateways are commonly placed, so it is more often a DHCP-assigned or statically reserved endpoint: a workstation, printer, access point, camera, storage device, virtual machine or container.
Most people reaching this page have seen 10.0.1.70 in a browser address bar, a DHCP lease list, an ARP table, a log line or a configuration file, and want to know what answers there and how to reach its management interface.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.0.1.0/24
The 10.0.1.0/24 subnet runs from 10.0.1.1 to 10.0.1.254, with 10.0.1.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
211 addresses in this subnet have a page; the most looked-up are listed here.