10.0.1.27 router login
To open the admin panel, type 10.0.1.27 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.0.1.27 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
There are no default username and password pairs documented for 10.0.1.27, and no specific vendor is known to ship this address. That is expected: credentials belong to a device and its firmware, not to a private address that any network can reuse.
Find the defaults on the device itself. Many units print them on a label on the underside or rear panel, often next to the serial number and the Wi-Fi key. Failing that, check the quick-start leaflet, the manual for the exact model number, or, for equipment supplied by an internet provider, that provider's own support pages or subscriber portal. If the login was changed after installation, only whoever administers the network can restore it.
How to log in to your router
Type 10.0.1.27 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.0.1.27, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
If no one knows the login, a factory reset is usually the last resort rather than the first step. Resetting clears the working configuration: Wi-Fi network name and key, port forwarding, static DHCP reservations, VLANs, firewall rules and any connection credentials the device stores. On provider-supplied equipment the line may also need reprovisioning before service returns, so note the current settings first if you can still read them.
Because no particular vendor is associated with this address, follow the procedure in the device's own manual. Many devices use a recessed button held with a paperclip for roughly ten to thirty seconds while powered on, but the required duration and the indicator behaviour vary by model.
10.0.1.27 belongs to 10.0.0.0/8, the largest of the three address ranges reserved for private use by RFC 1918. With a netmask of 255.0.0.0 the block spans 16,777,216 addresses, and none of them are routed on the public internet or registered to any organisation. The same address is therefore in use on a very large number of unrelated networks at the same time, and there is no location, provider or owner that can be looked up for it. Anything you learn about 10.0.1.27 applies only inside the network you are connected to.
In practice the address is normally read as part of the /24 subnet 10.0.1.0/24, whose usable hosts run from 10.0.1.1 to 10.0.1.254 with 10.0.1.255 as the broadcast address. It sits at host position 27, away from the first and last few positions that administrators commonly reserve for gateways and infrastructure, so on many networks an address this far into the range has been handed out by DHCP to an ordinary client rather than to a router. The /8 is common in corporate and campus networks, ISP-managed customer equipment, carrier gear, VPN pools and container networks, always subnetted far below /8.
Most people arriving here have seen 10.0.1.27 in a DHCP client list, an ARP table or a log entry, and want to open its web interface or work out which device it is.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.0.1.0/24
The 10.0.1.0/24 subnet runs from 10.0.1.1 to 10.0.1.254, with 10.0.1.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
211 addresses in this subnet have a page; the most looked-up are listed here.