10.0.1.16 router login
To open the admin panel, type 10.0.1.16 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.0.1.16 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
No default username and password pair is documented for 10.0.1.16, and none should be assumed. The address is private space that any manufacturer or network administrator may assign, so credentials depend entirely on the specific device answering at that address, not on the number itself.
Check the label or sticker on the device chassis first, since defaults are commonly printed there alongside the serial number and default access address. Failing that, consult the product manual or the manufacturer's support pages for that exact model, or your ISP's documentation if the equipment was supplied by them. On managed networks, the credentials were likely changed at deployment and only the administrator holds them.
How to log in to your router
Type 10.0.1.16 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.0.1.16, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
If the interface at 10.0.1.16 rejects every credential you have, first confirm what the device actually is: read the model from its label, or match the address against your DHCP lease table and connected-device list. That usually points to the right documentation faster than guessing at logins.
A factory reset is the last resort. It erases the running configuration, which on a device inside 10.0.1.0/24 can mean static addressing, VLAN assignments, firewall rules, port forwards and wireless settings all revert to defaults, and connectivity for other users may drop until it is reconfigured. Since no vendor is known to ship this address, follow the reset procedure in that device's own manual, and export or photograph the current settings beforehand.
10.0.1.16 is a private IPv4 address drawn from 10.0.0.0/8, the largest of the three RFC 1918 ranges. With a netmask of 255.0.0.0, that block spans 16,777,216 addresses, and none of them are routable across the public internet. Because the space is private, it carries no owner, no registrant, no ISP and no geographic location: the same address is in use simultaneously on countless unrelated networks, and the only thing that identifies a particular 10.0.1.16 is the network you are attached to when you type it.
The /8 is normally subnetted far below its native size. In practice you meet it in corporate and campus LANs, in ISP-managed customer premises equipment, in carrier-grade equipment, in VPN address pools, and in container and orchestration networks. Here the surrounding subnet is 10.0.1.0/24, whose usable hosts run from 10.0.1.1 to 10.0.1.254 with 10.0.1.255 reserved as the broadcast address. 10.0.1.16 sits sixteenth in that range, well away from the .1 and .254 positions where gateways are usually configured, so it more often belongs to a host, server or appliance than to the router itself.
Most people arriving here have seen 10.0.1.16 in a DHCP lease table, an ARP or connected-device list, a log entry or a configuration file, and want to know what device answers to it and how to reach its administrative interface.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.0.1.0/24
The 10.0.1.0/24 subnet runs from 10.0.1.1 to 10.0.1.254, with 10.0.1.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
211 addresses in this subnet have a page; the most looked-up are listed here.