10.0.1.31 router login
To open the admin panel, type 10.0.1.31 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.0.1.31 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
The credential list for 10.0.1.31 is empty, so no username or password should be presented as the default for it. Private addresses do not carry logins; devices do. On a segmented 10.x network this address is also quite likely to have been assigned dynamically, which makes any published pairing meaningless from one week to the next.
Trace the address to its hardware, then take the defaults from that unit's own label, its manual, or the configuration notes supplied by whoever set the network up.
How to log in to your router
Type 10.0.1.31 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.0.1.31, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
Recovering access is best attempted through the network's own management first: the DHCP server can tell you what the lease belongs to, and directory or console access often restores entry without touching the device.
A factory reset should be the last option. It clears certificates, static configuration, VLAN membership and any monitoring enrolment, and the device may then reappear on a default address outside 10.0.1.0/24 entirely. With no vendor known for this address, follow the recovery steps in that specific product's documentation rather than a generic sequence.
10.0.1.31 sits in 10.0.0.0/8, a range of 16,777,216 private addresses defined by the netmask 255.0.0.0. Its size is the point: organisations subnet it aggressively, which is why the same /8 shows up behind corporate and campus networks, ISP-managed customer equipment, carrier-grade platforms, VPN pools and container orchestration alike.
The relevant slice here is 10.0.1.0/24, offering hosts from 10.0.1.1 to 10.0.1.254 with 10.0.1.255 kept for broadcast. Note that this is a different subnet from 10.0.0.0/24 despite the near-identical look; devices on the two cannot reach each other without routing between them. Thirty-one is an ordinary host position, well clear of the low numbers reserved for gateways and infrastructure, and 210 other addresses in this /24 have documentation of their own.
People usually arrive at this address after finding it in a DHCP lease list, a VPN client assignment or an application log, and the practical question is what device is holding it right now rather than what the address means in the abstract.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.0.1.0/24
The 10.0.1.0/24 subnet runs from 10.0.1.1 to 10.0.1.254, with 10.0.1.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
211 addresses in this subnet have a page; the most looked-up are listed here.