192.168.0.100 router login
To open the admin panel, type 192.168.0.100 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
192.168.0.100 router passwords
8 default username and password pairs have been reported for devices answering on 192.168.0.100, ordered by how often each one is seen.
| Username / Password | Percentage |
|---|---|
| admin / password | 50% |
| admin / blank | 14% |
| admin / admin | 9% |
| Admin / 123456 | 9% |
| nodefault / nosetpassword | 5% |
| Admin / admin | 5% |
| blank / blank | 5% |
| admin / 123456or12345 | 5% |
Reports gathered for 192.168.0.100 point most often to admin with the password password, named in about half of them. Roughly nine percent each cite admin with no password, admin/admin, and Admin with 123456; smaller numbers report Admin/admin, admin with 123456 or 12345, and a blank password. These are user reports, not a specification — the label on your own device is authoritative.
How to log in to your router
Type 192.168.0.100 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 192.168.0.100, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
If none of those work, the device on this address has its own reset mechanism, commonly a pinhole button held while powered on. Resetting discards saved settings: static addressing, port forwarding, camera or storage configuration, and any accounts you created. On equipment that serves Wi-Fi, the network name and password revert to the values printed on the label, so reconnecting every client is part of the cost.
192.168.0.100 belongs to 192.168.0.0/16, the private range most people actually encounter. Its 65,536 addresses sit behind a 255.255.0.0 mask, and nearly every home router, mobile hotspot and small office access point ships a default gateway somewhere inside it. The subnet containing this address is 192.168.0.0/24, running 192.168.0.1 to 192.168.0.254 with 192.168.0.255 as broadcast.
Host .100 is not a gateway position — it is one of the most common starting addresses for a router's DHCP pool, so it usually belongs to a client such as a laptop, camera, printer or smart-home hub, or to a device given a static address by hand. No specific vendor is known to ship 192.168.0.100 as a default gateway. Most people looking it up are identifying a device on their own network or reaching a camera or NAS web page.
Whois information for 192.168.0.0/16
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 192.168.0.0 - 192.168.255.255
CIDR: 192.168.0.0/16
NetName: PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle: NET-192-168-0-0-1
Parent: NET192 (NET-192-0-0-0-0)
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1994-03-15
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/192.168.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 192.168.0.0/24
The 192.168.0.0/24 subnet runs from 192.168.0.1 to 192.168.0.254, with 192.168.0.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
250 addresses in this subnet have a page; the most looked-up are listed here.