192.168.0.246 router login

To open the admin panel, type 192.168.0.246 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

192.168.0.246 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

Nothing in the credential record covers 192.168.0.246, so no username and password can be stated. Whatever occupies the address arrived with its own defaults, printed on the underside sticker or rear panel and repeated in the supplied documentation. Devices that were set up through a phone app frequently use an account password chosen at installation instead of a printed default.

How to log in to your router

  1. Type 192.168.0.246 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 192.168.0.246, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

When access is lost, check whether the managing app can reset the password remotely before opening the hardware route. A physical factory reset clears the whole configuration, including any static assignment that put the device at this address, and it will likely reappear elsewhere in the pool afterwards. Wireless names and keys return to the label values.

This is a private address from 192.168.0.0/16, the range RFC 1918 set aside for local use and the one consumer networking equipment overwhelmingly adopts. It holds 65,536 addresses with netmask 255.255.0.0, and because the same numbers are reused in millions of separate homes and offices, the address identifies a position on a local network and nothing more.

Its subnet, 192.168.0.0/24, provides usable hosts from 192.168.0.1 to 192.168.0.254 with broadcast at 192.168.0.255. Ending in .246 places it close to the ceiling of that range, a zone many routers use for the tail of their DHCP pool or that installers pick for a fixed extender, printer or NAS placed deliberately out of the way. Most people looking it up have seen it in a connected-devices list.

Block192.168.0.0/16
Netmask255.255.0.0
Subnet192.168.0.0/24
Usable192.168.0.1 – 192.168.0.254

Whois information for 192.168.0.0/16

#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 192.168.0.0 - 192.168.255.255
CIDR: 192.168.0.0/16
NetName: PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle: NET-192-168-0-0-1
Parent: NET192 (NET-192-0-0-0-0)
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1994-03-15
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/192.168.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN