192.168.100.117 router login

To open the admin panel, type 192.168.100.117 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

192.168.100.117 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

No credential pair is documented for 192.168.100.117, and guessing at one would be misleading. A mid-pool address like this typically identifies a client rather than a gateway, and many clients present no login screen whatsoever.

Where a device does ask for one, its factory defaults are printed on the device itself, most often on a sticker on the base or rear panel, and repeated in the quick-start guide and manual. If the hardware came from a service provider, they may have set unique per-device credentials that only their documentation lists.

How to log in to your router

  1. Type 192.168.100.117 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 192.168.100.117, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

Recovering access by factory reset means accepting the loss of everything configured on that device: network profiles, saved passwords, custom settings and any pairing with apps or cloud accounts. On a router it additionally means every wireless client must be rejoined using the sticker credentials again.

Most equipment resets through a recessed button held for a specified number of seconds while powered, with the status lights signalling when it has taken effect. Consult the model's manual for the exact duration rather than assuming a standard one.

192.168.100.117 comes from 192.168.0.0/16, the RFC 1918 block described by netmask 255.255.0.0 and containing 65,536 addresses. Its reputation as the consumer range is earned: home routers, mobile hotspots and small office access points nearly all default to a gateway inside it. Nothing in the address is traceable to a person, company or country, because private ranges are unallocated space that any network may reuse without coordination.

The enclosing subnet is 192.168.100.0/24, with hosts from 192.168.100.1 up to 192.168.100.254 and broadcast on 192.168.100.255. At position 117 the address sits near the middle of the range, well past any slot a router would reserve, and comfortably inside the span most DHCP servers allocate. Addresses that high in a pool commonly belong to devices that joined after many others, or that were given a long lease at some point and kept renewing it. The full 254 host positions of this /24 are documented here.

Around 194 searches a year reach this address, usually from someone who spotted it in a router's client list or a network scan and wants to work out which device it is.

Block192.168.0.0/16
Netmask255.255.0.0
Subnet192.168.100.0/24
Usable192.168.100.1 – 192.168.100.254

Whois information for 192.168.0.0/16

#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 192.168.0.0 - 192.168.255.255
CIDR: 192.168.0.0/16
NetName: PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle: NET-192-168-0-0-1
Parent: NET192 (NET-192-0-0-0-0)
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1994-03-15
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/192.168.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN