192.168.100.52 router login

http://192.168.100.52 ↗

To open the admin panel, type 192.168.100.52 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

192.168.100.52 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

No default credential pair is documented for 192.168.100.52. Because this subnet mixes ordinary LAN clients with modem-side management interfaces, there is no single answer that would apply, and a guessed pair could be aimed at entirely the wrong class of device.

Read the defaults off the hardware itself: the printed label, the card included in the packaging, or the manufacturer's manual for that model. If the device came from a broadband provider, its credentials are usually assigned by the provider and published in their own support material or subscriber account rather than in the generic documentation.

How to log in to your router

  1. Type 192.168.100.52 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 192.168.100.52, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

Determine what sits at 192.168.100.52 first. If it is a client you own, a factory reset clears only that device's own settings, accounts and saved networks, and it will request a fresh lease afterwards, likely at a different number.

If instead it belongs to broadband equipment, resetting risks clearing provisioning and interrupting service until the unit re-registers with the provider. Where a reset is appropriate and yours to perform, the usual method is a recessed button held for about thirty seconds with power on. Record the Wi-Fi name and passphrase, forwarding rules and any connection credentials before you start.

192.168.100.52 belongs to 192.168.0.0/16, the block most people encounter, holding 65,536 addresses behind a 255.255.0.0 netmask and used for the default gateway of nearly every consumer router, mobile hotspot and small office access point. Because RFC 1918 space carries no global ownership, the address describes a position inside one particular network and nothing about who operates it.

The subnet is 192.168.100.0/24, running from 192.168.100.1 to 192.168.100.254 with broadcast on 192.168.100.255, and all 254 host positions are documented. This /24 has two quite different lives. Some routers and access points simply default their LAN to it, especially secondary units placed behind a main router; separately, cable modems and similar broadband terminations often expose a management or diagnostics interface somewhere in 192.168.100.x that stays reachable even when the rest of the network uses another range.

Position 52 is not a gateway slot, so it is a host: a client with a lease, or a statically addressed device on a LAN built on this subnet. People generally look it up after seeing it on a connected-devices list or in a modem status page and needing to tell a local client apart from broadband-side equipment.

Block192.168.0.0/16
Netmask255.255.0.0
Subnet192.168.100.0/24
Usable192.168.100.1 – 192.168.100.254

Whois information for 192.168.0.0/16
#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 192.168.0.0 - 192.168.255.255
CIDR: 192.168.0.0/16
NetName: PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle: NET-192-168-0-0-1
Parent: NET192 (NET-192-0-0-0-0)
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1994-03-15
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/192.168.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

Other documented addresses in 192.168.100.0/24

The 192.168.100.0/24 subnet runs from 192.168.100.1 to 192.168.100.254, with 192.168.100.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.

Most looked up in this subnet

192.168.100.4 192.168.100.1 192.168.100.5 192.168.100.3 192.168.100.6 192.168.100.2 192.168.100.7 192.168.100.8

All addresses we cover here
192.168.100.1 192.168.100.2 192.168.100.3 192.168.100.4 192.168.100.5 192.168.100.6 192.168.100.7 192.168.100.8 192.168.100.9 192.168.100.10 192.168.100.11 192.168.100.12 192.168.100.13 192.168.100.14 192.168.100.15 192.168.100.16 192.168.100.17 192.168.100.18 192.168.100.19 192.168.100.20 192.168.100.21 192.168.100.22 192.168.100.23 192.168.100.24 192.168.100.25 192.168.100.26 192.168.100.27 192.168.100.29 192.168.100.32 192.168.100.33 192.168.100.34 192.168.100.36 192.168.100.37 192.168.100.39 192.168.100.40 192.168.100.47 192.168.100.53 192.168.100.54 192.168.100.56 192.168.100.57 192.168.100.58 192.168.100.62 192.168.100.68 192.168.100.72 192.168.100.75 192.168.100.76 192.168.100.81 192.168.100.83 192.168.100.90 192.168.100.99 192.168.100.102 192.168.100.104 192.168.100.117 192.168.100.133 192.168.100.136 192.168.100.141 192.168.100.156 192.168.100.164 192.168.100.178 192.168.100.200

255 addresses in this subnet have a page; the most looked-up are listed here.