192.168.100.62 router login

To open the admin panel, type 192.168.100.62 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

192.168.100.62 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

No default credentials exist on record for 192.168.100.62, and there is no manufacturer associated with it that could supply a published pair. Given that this position is usually a DHCP-assigned client rather than fixed infrastructure, the device answering today may not even be the one that answered last week.

If the device does present a web login, get its defaults from the hardware in front of you. The rating label or underside sticker is the usual place, and the model's manual or support downloads repeat it. Consumer devices increasingly ship with a unique per-unit password printed on that label rather than a shared factory default, so nothing generic would work anyway.

How to log in to your router

  1. Type 192.168.100.62 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 192.168.100.62, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

Resetting is rarely the right response to an address in the DHCP range. If nothing responds at 192.168.100.62, the more likely explanation is that the lease expired and the device now holds a different address, so check the router's client list before touching the device itself.

When a genuine lockout does need clearing, remember the cost. A factory reset on a client device discards its pairings, accounts, stored networks and local settings, and on a camera or recorder can erase recording schedules. No vendor is known for this address, so follow the reset instructions published for the specific model rather than any general button-and-hold assumption.

192.168.100.62 is private space in 192.168.0.0/16, the block reserved by RFC 1918 for local use. Across a 255.255.0.0 netmask it covers 65,536 addresses, and its ubiquity in home routers, hotspots and small office access points is why it is the range most people encounter. Private addressing means the same number is in use on an enormous number of unconnected networks at once, so it can never be traced to a registrant, an operator or a country.

Its subnet is 192.168.100.0/24, running 192.168.100.1 to 192.168.100.254 with 192.168.100.255 as broadcast. Position 62 is well inside the range that DHCP servers typically hand out automatically, and it is not a position where gateways are normally configured. A machine reaching this address is far more likely talking to a client on the network, a laptop, phone, smart television, camera or printer that happened to be issued this lease, than to the router.

This subnet is unusually well documented here, with 254 other addresses recorded in it. About 174 people a year search for this particular address, generally after spotting it in a connected-devices list or an ARP table and wanting to know what it is.

Block192.168.0.0/16
Netmask255.255.0.0
Subnet192.168.100.0/24
Usable192.168.100.1 – 192.168.100.254

Whois information for 192.168.0.0/16

#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 192.168.0.0 - 192.168.255.255
CIDR: 192.168.0.0/16
NetName: PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle: NET-192-168-0-0-1
Parent: NET192 (NET-192-0-0-0-0)
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1994-03-15
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/192.168.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN