192.168.100.6 router login

http://192.168.100.6 ↗

To open the admin panel, type 192.168.100.6 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

192.168.100.6 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

No default username and password pair is documented for 192.168.100.6. That is expected rather than a gap: credentials belong to the device answering at the address, not to the address itself, and two networks using 192.168.100.6 may have completely different hardware behind it. Guessing wastes attempts and can trigger a lockout on equipment that rate-limits failed logins. Look instead at the label on the underside or rear of the unit, where defaults are commonly printed beside the serial number and Wi-Fi key, then at the manual or the provider's documentation if the unit was supplied by an ISP.

How to log in to your router

  1. Type 192.168.100.6 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 192.168.100.6, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

If the login is genuinely lost, a factory reset is the usual last resort, and it is not free: it clears the Wi-Fi name and passphrase, port forwards, static DHCP reservations, firewall rules and any PPPoE or account details, and units supplied by a provider sometimes need reprovisioning afterwards.

Since no specific vendor is known to ship this address, the general method applies: with the device powered on, hold the recessed reset button with a straightened paperclip for roughly ten to thirty seconds until the indicator lights cycle, then log in using the defaults printed on the label. Export the configuration first if the interface is still reachable.

192.168.100.6 is a private IPv4 address inside 192.168.0.0/16, the range RFC 1918 sets aside for private use, carrying the netmask 255.255.0.0 and 65,536 addresses in total. This is the consumer block: nearly every home router, mobile hotspot and small office access point ships a default gateway inside it, which is why it is the range most people encounter. Because the block is private, the address is not routable across the public internet and has no owner, operator or location — the same address is in use on countless unrelated networks at once.

Within that block it belongs to the 192.168.100.0/24 subnet, which runs from 192.168.100.1 to 192.168.100.254, with 192.168.100.255 reserved for broadcast. It is the sixth usable address in that range. Gateways are commonly placed at the first or last usable position, so an address this far in is more often a host than the router itself: a printer, network camera, NAS, secondary access point, or simply a DHCP lease that fell early in the pool.

No specific vendor is known to ship this address as a default gateway, so if a browser request to it returns nothing, check what your own equipment actually uses — the default gateway reported by ipconfig on Windows or ip route on Linux is the address that serves the router login page.

Block192.168.0.0/16
Netmask255.255.0.0
Subnet192.168.100.0/24
Usable192.168.100.1 – 192.168.100.254

Whois information for 192.168.0.0/16
#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 192.168.0.0 - 192.168.255.255
CIDR: 192.168.0.0/16
NetName: PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle: NET-192-168-0-0-1
Parent: NET192 (NET-192-0-0-0-0)
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1994-03-15
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/192.168.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

Other documented addresses in 192.168.100.0/24

The 192.168.100.0/24 subnet runs from 192.168.100.1 to 192.168.100.254, with 192.168.100.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.

Most looked up in this subnet

192.168.100.4 192.168.100.1 192.168.100.5 192.168.100.3 192.168.100.2 192.168.100.7 192.168.100.8 192.168.100.17

All addresses we cover here
192.168.100.1 192.168.100.2 192.168.100.3 192.168.100.4 192.168.100.5 192.168.100.7 192.168.100.8 192.168.100.9 192.168.100.10 192.168.100.11 192.168.100.12 192.168.100.13 192.168.100.14 192.168.100.15 192.168.100.16 192.168.100.17 192.168.100.18 192.168.100.19 192.168.100.20 192.168.100.21 192.168.100.22 192.168.100.23 192.168.100.24 192.168.100.25 192.168.100.26 192.168.100.27 192.168.100.29 192.168.100.32 192.168.100.33 192.168.100.34 192.168.100.36 192.168.100.37 192.168.100.39 192.168.100.40 192.168.100.47 192.168.100.52 192.168.100.53 192.168.100.54 192.168.100.56 192.168.100.57 192.168.100.58 192.168.100.62 192.168.100.68 192.168.100.72 192.168.100.75 192.168.100.76 192.168.100.81 192.168.100.83 192.168.100.90 192.168.100.99 192.168.100.102 192.168.100.104 192.168.100.117 192.168.100.133 192.168.100.136 192.168.100.141 192.168.100.156 192.168.100.164 192.168.100.178 192.168.100.200

255 addresses in this subnet have a page; the most looked-up are listed here.