192.168.100.58 router login

To open the admin panel, type 192.168.100.58 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

192.168.100.58 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

No default username and password is recorded for 192.168.100.58, so this page will not supply one. Identify the device before looking for a login, because a mid-range address frequently belongs to an ordinary client with no administrative interface, in which case there is nothing to sign in to.

Once the device is identified, its own label and its model manual carry any shipped defaults. Devices supplied by an employer, a landlord or a service provider have credentials recorded on their side, and those defaults are commonly replaced during installation. Published generic pairs are not a substitute for either source.

How to log in to your router

  1. Type 192.168.100.58 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 192.168.100.58, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

Resetting is rarely the right first move for an address in this position. If the goal is simply to reach or identify the device, the router's lease table, a hostname lookup or a reservation for the address will get you further without disturbing anything.

When a reset is unavoidable, count the cost: stored network settings, linked accounts, paired devices and local data typically go, and the equipment usually reappears on a factory default address rather than on 192.168.100.58. No vendor is known to ship this address, so the correct procedure is whatever that particular model's documentation describes, not a generic pinhole-and-count routine.

192.168.100.58 belongs to 192.168.0.0/16, the private range with 65,536 addresses under a 255.255.0.0 netmask. It is the block behind the overwhelming majority of home routers, mobile hotspots and small office access points, which is why its addresses are the ones people encounter most.

The subnet is 192.168.100.0/24, running from 192.168.100.1 to 192.168.100.254 with 192.168.100.255 as the broadcast address. Host position 58 sits in the lower middle of the range, which is ambiguous in a useful way: it is high enough to be an automatically issued DHCP lease and low enough to be a deliberate static assignment, depending on where the network's pool begins. Every usable address in this /24 is documented here, so the range as a whole sees wide use.

People usually meet this address in a router's list of attached devices, in a firewall log or in the output of a network scanner, and the real question is what is on the other end. Two things narrow it down quickly: the hostname shown alongside the lease, and the manufacturer prefix of the associated MAC address, both of which the router normally displays next to the entry.

Block192.168.0.0/16
Netmask255.255.0.0
Subnet192.168.100.0/24
Usable192.168.100.1 – 192.168.100.254

Whois information for 192.168.0.0/16

#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 192.168.0.0 - 192.168.255.255
CIDR: 192.168.0.0/16
NetName: PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle: NET-192-168-0-0-1
Parent: NET192 (NET-192-0-0-0-0)
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1994-03-15
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/192.168.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN