192.168.100.16 router login

To open the admin panel, type 192.168.100.16 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

192.168.100.16 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

No credential pair is documented for 192.168.100.16, so none is given. Devices reached on a separate management subnet like this one sometimes use an account issued by a service provider rather than a generic factory default, which is another reason not to rely on published guesses. Check the label on the equipment itself, the printed or downloadable manual for the model, and any account or installation documentation supplied by whoever provisioned the connection. Those three sources cover nearly every case.

How to log in to your router

  1. Type 192.168.100.16 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 192.168.100.16, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

Resetting equipment that sits on a management or modem-side segment carries a particular risk: the reset can clear provisioning applied remotely by a service provider, leaving the unit functional but unable to connect until it is reprovisioned. More generally, a factory reset erases wireless configuration, firewall and forwarding rules and any custom addressing that placed the device on 192.168.100.0/24. Since no vendor is known to ship this address, follow the procedure for your specific model, and contact the provider first if the equipment came from them.

192.168.100.16 lies within 192.168.0.0/16, the private range most people encounter, spanning 65,536 addresses under a 255.255.0.0 netmask. Because RFC 1918 space is never routed on the public internet, this address exists independently on any number of separate networks and belongs to no particular organisation or place.

Its subnet is 192.168.100.0/24, with usable hosts from 192.168.100.1 to 192.168.100.254 and broadcast at 192.168.100.255. This third octet has a distinct reputation: it commonly appears on modem-side or management segments kept separate from the main LAN, and it is also a frequent choice when someone wants a subnet that will not clash with the stock 192.168.0.x and 192.168.1.x defaults of other equipment on the same premises. Every one of the 254 usable addresses in this subnet has some documentation, which indicates a densely used range rather than a niche one.

Position 16 sits low in the host range, where fixed assignments are more usual than DHCP leases. Roughly 153 people a year look this address up, generally after finding it in a device status page, a bridged-modem configuration or a network scan, and wanting to know what sits there. It is not a typical gateway position.

Block192.168.0.0/16
Netmask255.255.0.0
Subnet192.168.100.0/24
Usable192.168.100.1 – 192.168.100.254

Whois information for 192.168.0.0/16

#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 192.168.0.0 - 192.168.255.255
CIDR: 192.168.0.0/16
NetName: PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle: NET-192-168-0-0-1
Parent: NET192 (NET-192-0-0-0-0)
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1994-03-15
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/192.168.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN