192.168.100.13 router login

http://192.168.100.13 ↗

To open the admin panel, type 192.168.100.13 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

192.168.100.13 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

No default username and password pair is documented for 192.168.100.13, which is what you would expect: an address is not a product. Whatever answers on it could be any make of router, camera, printer or server, each with its own defaults. Check the label or sticker on the device itself, which commonly prints the default login next to the serial number and Wi-Fi key; failing that, the manual for the exact model, or the setup documentation supplied by an ISP for equipment it issued. Avoid repeated guesses, since many devices delay or lock out logins after a few failures.

How to log in to your router

  1. Type 192.168.100.13 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 192.168.100.13, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

When the login has been changed and lost, a factory reset is usually the only way back in. Weigh the cost first: a reset clears the Wi-Fi name and password, port forwards, static leases, firewall and VLAN rules, and any ISP account details entered at setup, so the device and every client attached to it need reconfiguring. No specific hardware is known at this address, so follow the device's own manual for the exact procedure; commonly it is a recessed button held with a pin for ten to thirty seconds while the unit is powered on. Afterwards it may return on a different address than 192.168.100.13, so rescan the subnet to find it.

192.168.100.13 is a private IPv4 address inside 192.168.0.0/16, the largest of the three ranges RFC 1918 reserves for private use. That block holds 65,536 addresses under a 255.255.0.0 netmask, and it is the consumer range: nearly every home router, mobile hotspot and small office access point ships a default gateway inside it, which is why it is the range most people encounter. Because the space is private, the same address is in use on countless unrelated networks at once. It has no registrant, ISP or location of its own, and traffic addressed to it is not routed across the public internet.

Within a conventional /24 the address sits in 192.168.100.0/24, whose usable host range runs from 192.168.100.1 to 192.168.100.254, with 192.168.100.255 reserved for broadcast. It is the thirteenth host position in that subnet. Gateways are commonly placed at the first or last usable address, and no particular vendor is known to ship 192.168.100.13 as a factory default gateway, so it is usually not the router. More often it falls inside a DHCP pool or a run of static assignments and belongs to a client: a printer, camera, NAS, access point or server.

Most people looking it up have found it in a DHCP client list, an ARP table or a network scan and want to open whatever answers on it, typically at http://192.168.100.13, from a machine on the same subnet.

Block192.168.0.0/16
Netmask255.255.0.0
Subnet192.168.100.0/24
Usable192.168.100.1 – 192.168.100.254

Whois information for 192.168.0.0/16
#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 192.168.0.0 - 192.168.255.255
CIDR: 192.168.0.0/16
NetName: PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle: NET-192-168-0-0-1
Parent: NET192 (NET-192-0-0-0-0)
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1994-03-15
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/192.168.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

Other documented addresses in 192.168.100.0/24

The 192.168.100.0/24 subnet runs from 192.168.100.1 to 192.168.100.254, with 192.168.100.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.

Most looked up in this subnet

192.168.100.4 192.168.100.1 192.168.100.5 192.168.100.3 192.168.100.6 192.168.100.2 192.168.100.7 192.168.100.8

All addresses we cover here
192.168.100.1 192.168.100.2 192.168.100.3 192.168.100.4 192.168.100.5 192.168.100.6 192.168.100.7 192.168.100.8 192.168.100.9 192.168.100.10 192.168.100.11 192.168.100.12 192.168.100.14 192.168.100.15 192.168.100.16 192.168.100.17 192.168.100.18 192.168.100.19 192.168.100.20 192.168.100.21 192.168.100.22 192.168.100.23 192.168.100.24 192.168.100.25 192.168.100.26 192.168.100.27 192.168.100.29 192.168.100.32 192.168.100.33 192.168.100.34 192.168.100.36 192.168.100.37 192.168.100.39 192.168.100.40 192.168.100.47 192.168.100.52 192.168.100.53 192.168.100.54 192.168.100.56 192.168.100.57 192.168.100.58 192.168.100.62 192.168.100.68 192.168.100.72 192.168.100.75 192.168.100.76 192.168.100.81 192.168.100.83 192.168.100.90 192.168.100.99 192.168.100.102 192.168.100.104 192.168.100.117 192.168.100.133 192.168.100.136 192.168.100.141 192.168.100.156 192.168.100.164 192.168.100.178 192.168.100.200

255 addresses in this subnet have a page; the most looked-up are listed here.