10.0.0.143 router login

To open the admin panel, type 10.0.0.143 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

10.0.0.143 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

There is no documented default username and password for 10.0.0.143, and no credible list could produce one. Since the address is private and reusable, the login on your network depends entirely on the physical device answering at it, which nobody outside your network can identify. Look for the defaults printed on the label on the device's underside or rear panel, in the printed or downloadable manual for that exact model, or, on equipment supplied by an internet provider, in the documentation or account portal that came with the service. If a previous administrator changed the password, no default will work.

How to log in to your router

  1. Type 10.0.0.143 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 10.0.0.143, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

Start with the least destructive options: check whether the credentials are stored in a browser password manager, a network documentation file, or an installer app associated with the device. A factory reset, commonly performed by holding a recessed button for roughly ten to thirty seconds while the unit is powered on, is a last resort. Because no vendor is known to ship this address, follow the reset procedure in that specific device's manual rather than any generic sequence. A reset erases the whole configuration, including any static assignment that placed the device at 10.0.0.143, so it will likely reappear at a different address afterwards.

10.0.0.143 is a private IPv4 address from 10.0.0.0/8, the largest of the three RFC 1918 ranges, with a netmask of 255.0.0.0 and 16,777,216 addresses. Because RFC 1918 space is never routed on the public internet, this exact address exists simultaneously on countless unrelated networks, and none of them has any claim to it. It carries no geographic location, no ISP, no registrant and no owner. Any page that tells you where 10.0.0.143 "is" is describing an assumption, not a fact.

In practice, 10.0.0.0/8 is almost never used as a single flat network. It is subnetted far below /8 in corporate and campus networks, ISP-managed customer equipment, carrier-grade infrastructure, VPN address pools and container and orchestration networks. This address sits within 10.0.0.0/24, a subnet whose usable host range is 10.0.0.1 through 10.0.0.254, with 10.0.0.255 reserved as the broadcast address. At host position 143 of that range, it is not one of the low positions that gateways conventionally occupy, so on most networks it belongs to a client, server or other endpoint rather than to the router itself.

Roughly 301 people a year look up this address. Most are trying to reach a device's management page, having found the address in a DHCP client list, an ARP table or an app's network settings.

Block10.0.0.0/8
Netmask255.0.0.0
Subnet10.0.0.0/24
Usable10.0.0.1 – 10.0.0.254

Whois information for 10.0.0.0/8

#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent:  ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

Other documented addresses in 10.0.0.0/24

The 10.0.0.0/24 subnet runs from 10.0.0.1 to 10.0.0.254, with 10.0.0.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.

Most looked up in this subnet

All addresses we cover here

255 addresses in this subnet have a page; the most looked-up are listed here.