10.0.0.27 router login
To open the admin panel, type 10.0.0.27 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.0.0.27 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
No default username and password pair is documented for this address, and that is the accurate answer rather than a gap. Credentials belong to a particular device and firmware, never to an IP address, and any list that claims otherwise for a private address is guessing. Check the label on the underside or rear of the unit, where many manufacturers now print a unique per-device password, then the quick-start guide or manual, and finally the provider's own documentation if the equipment was supplied with a broadband service. Some current devices ship with no factory password at all and require one to be set during first-time setup.
How to log in to your router
Type 10.0.0.27 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.0.0.27, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
If the credentials are genuinely unknown and nothing is printed on the label, a factory reset is the usual last resort. It typically means holding a recessed button, often for ten to thirty seconds while the unit is powered on, but the exact hold time and behaviour vary, so follow the documented procedure for that specific model. The cost is real: a reset commonly clears the Wi-Fi network name and key, port forwards, static leases, VLAN and firewall rules and any stored connection credentials, and provider-supplied equipment may need re-provisioning afterwards. Export or photograph the configuration first. A reset also helps only if the device at this address is one you administer directly.
10.0.0.27 belongs to 10.0.0.0/8, the largest of the three address ranges reserved for private use by RFC 1918. With a netmask of 255.0.0.0 the block spans 16,777,216 addresses, and it is the range most often chosen by corporate and campus networks, ISP-managed customer equipment, carrier-grade gear, VPN address pools and container or orchestration networks, all of which subnet it far below /8. Private addresses are not routed on the public internet and are reusable without registration, so the same address exists at the same moment on a great many unrelated networks. No location, internet provider, owner or organisation can be attributed to it.
Within its own network the address normally sits in the 10.0.0.0/24 subnet, whose usable range runs from 10.0.0.1 to 10.0.0.254 with 10.0.0.255 reserved as the broadcast address. Position 27 is not one of the low or high positions that gateways typically occupy, so on most networks this address is held by an ordinary host rather than the router: a DHCP lease handed to a laptop or phone, or a static assignment given to a printer, NAS, access point, camera, server or virtual machine.
Most people arrive here after seeing 10.0.0.27 in a router's client list, an ARP table, a log entry or a network scan, and want to know what it is and how to open its management page.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.0.0.0/24
The 10.0.0.0/24 subnet runs from 10.0.0.1 to 10.0.0.254, with 10.0.0.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
255 addresses in this subnet have a page; the most looked-up are listed here.