10.0.0.64 router login

To open the admin panel, type 10.0.0.64 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

10.0.0.64 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

No default username and password pair is documented for 10.0.0.64, and no specific vendor is known to ship this address as a default gateway, so there is nothing reliable to quote. Guessing at a pair is more likely to lock an account than to open a session.

If the device answering on this address has a web interface, its own defaults are the ones that matter. They are commonly printed on a label on the underside or rear panel, alongside the serial number and Wi-Fi key, and repeated in the quick-start guide or manual. For ISP-supplied equipment, the credentials are often listed in the subscriber documentation or the account portal rather than on the hardware.

How to log in to your router

  1. Type 10.0.0.64 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 10.0.0.64, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

Before resetting anything, confirm what actually holds 10.0.0.64. Since this is not a position gateways commonly take, the responding host may be a client device for which a factory reset is the wrong tool. Check saved browser credentials, a stored configuration backup, or whoever administers the network.

Where a reset is appropriate, the usual method is a recessed button held with a paperclip while the unit is powered on, for the duration the device's own manual specifies. The cost is real: it clears the administrator password along with Wi-Fi names and keys, port forwarding, static leases, VLANs and any ISP connection settings, and ISP-managed hardware may need reprovisioning afterwards.

10.0.0.64 is a private IPv4 address from 10.0.0.0/8, the range RFC 1918 sets aside as the largest of the three private blocks. With a netmask of 255.0.0.0 it spans 16,777,216 addresses, and it is used heavily in corporate and campus networks, ISP-managed CPE, carrier-grade equipment, VPN address pools and container or orchestration networks, where the space is subnetted far below /8 in practice. Because private space is unallocated and reusable by anyone, the address has no owner, registrant, network operator or geographic location: it identifies a host only inside whatever network you are currently connected to.

Read as part of a /24, the address falls in 10.0.0.0/24, which offers 10.0.0.1 through 10.0.0.254 for hosts and reserves 10.0.0.255 as the broadcast address. 10.0.0.64 sits at the sixty-fourth host position, not one of the low or high positions gateways commonly occupy, so it is more often a DHCP-leased or statically assigned endpoint: a laptop, phone, printer, access point, camera, NAS, virtual machine or container.

Most people looking this address up have found it in a DHCP lease table, an ARP table or a log line and want to identify the device holding it, or have typed it into a browser expecting a login page and reached nothing.

Block10.0.0.0/8
Netmask255.0.0.0
Subnet10.0.0.0/24
Usable10.0.0.1 – 10.0.0.254

Whois information for 10.0.0.0/8

#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent:  ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

Other documented addresses in 10.0.0.0/24

The 10.0.0.0/24 subnet runs from 10.0.0.1 to 10.0.0.254, with 10.0.0.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.

Most looked up in this subnet

All addresses we cover here

255 addresses in this subnet have a page; the most looked-up are listed here.