10.0.0.52 router login
To open the admin panel, type 10.0.0.52 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.0.0.52 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
There are no documented default username and password pairs for 10.0.0.52, and that is expected: a private address says nothing about what hardware answers on it. Any credential list attached to this number specifically would be guesswork.
Find the defaults from the device instead. They are commonly printed on a label on the underside or rear of the unit, alongside the serial number and any default wireless key. Failing that, check the printed or downloadable manual for the exact model, or your ISP's support pages if the equipment was supplied by them. On many devices the first login forces you to set your own password, so a previously configured unit will not accept factory defaults at all.
How to log in to your router
Type 10.0.0.52 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.0.0.52, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
If the credentials have been changed and are not recorded anywhere, try the obvious avenues first: a saved entry in a browser or password manager, the network administrator, or your ISP if the device is theirs. Some equipment also allows recovery over a local console or management app without a full wipe.
A factory reset is the last resort because it is genuinely costly. It clears the wireless network name and key, any port forwarding, static leases, firewall rules and, on ISP equipment, sometimes the broadband or VoIP credentials needed to reconnect. Since no vendor is known to ship this address as a default gateway, follow the reset procedure in your specific device's own documentation rather than a generic one, and export a configuration backup beforehand if the option exists.
10.0.0.52 is a private IPv4 address drawn from 10.0.0.0/8, the largest of the three blocks reserved for private use by RFC 1918. With a netmask of 255.0.0.0, that block spans 16,777,216 addresses, and it carries no meaning on the public internet: packets addressed to it are not routed between networks, and the same address is in use simultaneously on countless unrelated networks worldwide. Nothing about the address itself identifies an organisation, a provider or a place.
The /8 is almost never deployed flat. It is subnetted far below its native size, which is why it turns up in corporate and campus networks, in ISP-managed customer premises equipment, on carrier-grade gear, in VPN address pools and in container and orchestration networks. In the /24 that contains it, 10.0.0.0/24, the usable host range runs from 10.0.0.1 to 10.0.0.254 with 10.0.0.255 as the broadcast address. 10.0.0.52 sits at position 52 in that range, well away from the low positions routers conventionally take, so it more commonly belongs to a host or a DHCP-assigned client than to a gateway.
Most people looking this address up have found it in a DHCP lease table, a connected-device list, a log entry or an ARP cache, and want to know what is answering there and how to reach its configuration.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.0.0.0/24
The 10.0.0.0/24 subnet runs from 10.0.0.1 to 10.0.0.254, with 10.0.0.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
255 addresses in this subnet have a page; the most looked-up are listed here.