10.0.0.95 router login
To open the admin panel, type 10.0.0.95 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.0.0.95 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
No default username and password pair is documented for 10.0.0.95. Since a private address says nothing about the hardware behind it, publishing a pair here would be a guess, and entering guessed credentials repeatedly can trigger a lockout on devices that rate-limit login attempts.
Find the defaults from the device itself instead. They are commonly printed on a sticker on the underside or rear panel, alongside the serial number and any default Wi-Fi key, or given in the quick-start card and manual. On ISP-supplied equipment the credentials are often unique per unit and listed in the provider's account portal or welcome documentation rather than in any general reference.
How to log in to your router
Type 10.0.0.95 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.0.0.95, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
If the defaults do not work, the device was almost certainly given a custom password during setup. Check any password manager, installation notes or handover documentation before going further, and on managed or ISP equipment ask the provider or your network administrator, who can frequently restore access remotely without touching the hardware.
A factory reset is the last resort because it is destructive: it clears the custom password along with Wi-Fi names and keys, port forwarding, static leases, firewall rules and any ISP-specific provisioning, and connected clients will drop until they are reconfigured. No vendor-specific reset procedure is known for this address, so follow the instructions for your particular model. Recovering an ISP-provisioned unit may require a service call.
10.0.0.95 is a private IPv4 address from 10.0.0.0/8, the largest of the three RFC 1918 blocks. With a netmask of 255.0.0.0 it spans 16,777,216 addresses, which is why it is rarely deployed at its full size. In practice the block is subnetted far below /8 and turns up in corporate and campus networks, ISP-managed customer equipment, carrier-grade gear, VPN address pools and container or orchestration networks. Because this space is unallocated and reusable by anyone, no owner, ISP, organisation or geographic location can be attached to 10.0.0.95; the same address may be in use on thousands of unrelated networks at the same time, and it is not routable across the public internet.
Read as part of 10.0.0.0/24, the address sits at host position 95 of the usable range 10.0.0.1 through 10.0.0.254, with 10.0.0.255 reserved as the subnet broadcast address. Position 95 is not one of the low positions a router typically claims for itself, so on most networks an address in this part of the range belongs to a client or server that received it from DHCP or was assigned statically, rather than to the gateway.
About 453 people a year look up this address. Most are trying to reach a device answering on it, or to work out what the device is after seeing the address in a DHCP lease table, an ARP listing or a log entry.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.0.0.0/24
The 10.0.0.0/24 subnet runs from 10.0.0.1 to 10.0.0.254, with 10.0.0.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
255 addresses in this subnet have a page; the most looked-up are listed here.