10.0.0.63 router login
To open the admin panel, type 10.0.0.63 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.0.0.63 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
There is no known default username and password associated with 10.0.0.63. Credentials belong to the device answering at an address, not to the address itself, and since private space is reused freely across unrelated networks, no pair can be attributed here without inventing it.
Find the defaults on the equipment instead. They are commonly printed on a sticker on the underside or rear panel, alongside the serial number and default Wi-Fi key. Failing that, check the printed quick-start guide, the manufacturer's support page for that exact model, or your ISP's documentation, since provider-supplied equipment often ships with per-unit credentials rather than a shared default.
How to log in to your router
Type 10.0.0.63 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.0.0.63, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
If the login is refused and no working credentials can be found, a factory reset is the usual last resort. On most equipment this means holding a recessed button, often labelled Reset and reachable only with a paperclip, for roughly ten to thirty seconds while the unit is powered on. No specific vendor is known to ship 10.0.0.63 as a default gateway address, so consult the manual for your own hardware rather than assuming a procedure.
Understand the cost before doing it. A reset commonly wipes Wi-Fi names and passwords, port forwarding, static leases, firewall rules and any ISP-specific provisioning, and the network may need reconfiguring from scratch afterwards. Export a configuration backup first if the interface still permits it.
10.0.0.63 is a private IPv4 address from 10.0.0.0/8, the largest of the three RFC 1918 ranges. With a netmask of 255.0.0.0 the block spans 16,777,216 addresses, and none of them are routable across the public internet. Any organisation may use this space internally, and many do simultaneously, so an address like 10.0.0.63 carries no owner, no location and no service provider — it only has meaning inside whichever network you are currently connected to. In practice the /8 is almost never deployed flat; it is subnetted far below its native size for corporate and campus networks, ISP-managed customer equipment, carrier-grade gear, VPN address pools and container or orchestration networks.
Within the 10.0.0.0/24 subnet, usable host addresses run from 10.0.0.1 to 10.0.0.254, with 10.0.0.255 reserved as the broadcast address. 10.0.0.63 sits at host position 63, well away from the low positions where gateways are conventionally placed, so on most networks it is more likely to belong to a client, server or DHCP-assigned device than to the router itself.
Roughly 438 people a year look up this address. Most are trying to reach a web interface they have seen referenced on a device, in a DHCP lease table or in a network scan, and need to know what sits there and how to sign in.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.0.0.0/24
The 10.0.0.0/24 subnet runs from 10.0.0.1 to 10.0.0.254, with 10.0.0.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
255 addresses in this subnet have a page; the most looked-up are listed here.