192.168.100.106 router login

To open the admin panel, type 192.168.100.106 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

192.168.100.106 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

No default login is documented for 192.168.100.106, so none is offered here. If the address is a rotating DHCP lease, there may be no fixed device to have credentials at all. Once you have identified what is answering, get the defaults from the device rather than from any generic list: the label on its body, the setup sheet supplied with it, or the manual for the specific model. Equipment configured by an internet provider often uses a per-unit password printed on the housing.

How to log in to your router

  1. Type 192.168.100.106 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 192.168.100.106, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

Where the address is a DHCP lease, a login problem is often better solved by finding the device than by resetting anything. Match the address to a hostname or MAC in the router's lease table, then work with the device directly. If a reset is genuinely needed, understand that it returns the hardware to its shipping configuration and discards saved networks, accounts, shares and rules; on a router it also drops wireless settings, so every connected device must be rejoined afterwards. The procedure — button, hold time, indicator behaviour — is model-specific and should come from the device's own instructions.

192.168.100.106 is a private IPv4 address inside 192.168.0.0/16. RFC 1918 reserves that block — 65,536 addresses behind the netmask 255.255.0.0 — for use on internal networks, and routers on the public internet will not forward traffic toward it. It is the consumer block: nearly every home router, mobile hotspot and small office access point ships a default gateway inside it, which is why it is the range most people encounter.

Under a standard /24 mask the address sits in 192.168.100.0/24, a subnet running 192.168.100.1 to 192.168.100.254 with 192.168.100.255 reserved for broadcast. Host 106 falls in the busiest part of a typical DHCP pool. Many routers begin leasing at .100, which puts .106 among the first handful of addresses assigned, and it can move between devices as leases expire — the phone that held it last week may not hold it today.

That volatility is usually why people look it up. They have found 192.168.100.106 in a router's device table, a media server's log or a scanner's output and want to establish which machine it currently refers to, or reach an admin page they believe is hosted there.

Block192.168.0.0/16
Netmask255.255.0.0
Subnet192.168.100.0/24
Usable192.168.100.1 – 192.168.100.254

Whois information for 192.168.0.0/16

#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 192.168.0.0 - 192.168.255.255
CIDR: 192.168.0.0/16
NetName: PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle: NET-192-168-0-0-1
Parent: NET192 (NET-192-0-0-0-0)
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1994-03-15
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/192.168.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN