192.168.100.124 router login

To open the admin panel, type 192.168.100.124 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

192.168.100.124 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

No default credential pair is documented for 192.168.100.124, so none is stated here. On a segment that may be serving a modem, a secondary router or an isolated device group, the login that works depends entirely on which unit answers.

The device's own defaults, if it has them, are normally printed on a label on its case or given in the manual for the specific model. Where an internet provider installed the hardware, the administrative password is frequently provider-set and documented in the account portal or the installation paperwork rather than on the equipment.

How to log in to your router

  1. Type 192.168.100.124 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 192.168.100.124, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

Identify the device before acting, since segments like this one often carry a bridged modem or a downstream router whose reset has knock-on effects for everything behind it. If the web interface still loads, look for a configuration backup and take one first.

A factory reset drops the unit back to shipped state: management addressing, bridge or routing mode, wireless settings, forwarding rules, DHCP scope and any provider provisioning are all lost, and provider-managed equipment may need to be re-registered before service returns. Typically it means holding a recessed button for ten to thirty seconds while the device is powered, then waiting out a full reboot.

192.168.100.124 falls within 192.168.0.0/16, the RFC 1918 block that spans 65,536 private addresses under the mask 255.255.0.0. It is the consumer range, the one nearly all home routers, hotspots and small office access points default into, and because it is private it is reused freely — the identical address may exist on any number of unrelated networks at the same moment.

The surrounding subnet is 192.168.100.0/24, addressable from 192.168.100.1 to 192.168.100.254 with 192.168.100.255 as the broadcast address. This particular third octet is a familiar one: 192.168.100.0/24 is often kept apart from the main LAN and used for a modem or bridge management interface, a secondary segment behind a second router, or an isolated network for cameras, IoT devices or lab equipment. All 254 usable hosts here are documented.

Host 124 is a middle-of-the-range position, not one of the low numbers a gateway would normally take, so it more plausibly belongs to a client or an appliance on the segment. Visitors usually arrive after seeing this address in a device list, a bridged-modem status page or a log and needing to know what it corresponds to locally.

Block192.168.0.0/16
Netmask255.255.0.0
Subnet192.168.100.0/24
Usable192.168.100.1 – 192.168.100.254

Whois information for 192.168.0.0/16

#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 192.168.0.0 - 192.168.255.255
CIDR: 192.168.0.0/16
NetName: PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle: NET-192-168-0-0-1
Parent: NET192 (NET-192-0-0-0-0)
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1994-03-15
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/192.168.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN