192.168.100.237 router login
To open the admin panel, type 192.168.100.237 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
192.168.100.237 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
There is no recorded credential pair for 192.168.100.237 and no vendor is known to use it as a shipped default gateway. The trustworthy source is the device in hand: check the printed label, the quick-start card, or the support page for that exact model number. Many devices force a password to be set on first use, replacing any factory default outright.
How to log in to your router
Type 192.168.100.237 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 192.168.100.237, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
If access is lost, a factory reset returns the device to its label credentials while destroying the configuration built on top — custom addressing, DHCP behaviour, forwarded ports, access rules and scheduling. Wi-Fi reverts to the network name and key printed on the unit. A high-numbered lease like this one is unlikely to be reissued afterwards, so re-locate the device once it restarts.
192.168.100.237 sits within 192.168.0.0/16, the 65,536-address consumer range masked at 255.255.0.0 that nearly every domestic router, hotspot and small-office access point draws its gateway from. The address is part of 192.168.100.0/24, where valid hosts span 192.168.100.1 to 192.168.100.254 and 192.168.100.255 serves as the broadcast address.
Position 237 is close to the ceiling of the subnet, only a handful of addresses short of the broadcast boundary. High allocations like this normally come from the tail of a DHCP pool, meaning the device holding it was among the later ones to join, or the pool has cycled through most of its range. Some networks also reserve the top of the range for infrastructure such as repeaters and mesh nodes, so the numbering convention on the specific network matters more than the address itself. Anyone here is typically matching an unfamiliar entry in a client list to a real device. The /24 contains 254 other documented addresses.
Whois information for 192.168.0.0/16
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 192.168.0.0 - 192.168.255.255
CIDR: 192.168.0.0/16
NetName: PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle: NET-192-168-0-0-1
Parent: NET192 (NET-192-0-0-0-0)
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1994-03-15
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/192.168.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 192.168.100.0/24
The 192.168.100.0/24 subnet runs from 192.168.100.1 to 192.168.100.254, with 192.168.100.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
255 addresses in this subnet have a page; the most looked-up are listed here.