192.168.100.30 router login

http://192.168.100.30 ↗

To open the admin panel, type 192.168.100.30 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

192.168.100.30 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

There is no documented default login associated with 192.168.100.30. Credentials travel with hardware, and no hardware is tied to this address, so any specific username and password quoted for it would be invented.

Look instead at the equipment itself. Most consumer and small business devices print the initial administrative account, and often a separate Wi-Fi passphrase, on a label attached to the chassis. The printed manual and the vendor's support site carry the same values, and where a service provider supplied the unit its documentation is authoritative. Anything changed at setup replaces the factory value permanently.

How to log in to your router

  1. Type 192.168.100.30 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 192.168.100.30, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

Before resetting anything, work out what holds the address. If .30 is a statically assigned server or appliance, a reset may disrupt services other machines depend on; if it is an ordinary DHCP client, the address will simply move elsewhere.

A factory reset is destructive by design. It clears wireless settings, administrative accounts, DHCP reservations, VPN definitions and firmware-level customisation, restoring the state the device shipped in. On most hardware you hold a recessed reset control for ten to thirty seconds with power applied and wait for the indicator lights to cycle. Reconfiguration afterwards is manual unless you saved a settings backup.

The 10-bit private allocation 192.168.0.0/16 covers 65,536 addresses behind a 255.255.0.0 netmask, and 192.168.100.30 is one of them. RFC 1918 set this block aside for local use only, which is why it dominates consumer equipment: home routers, travel hotspots and small office access points overwhelmingly pick their default gateway from it. Traffic to it never crosses the public internet, and the same number is simultaneously in use on unrelated networks worldwide.

The relevant subnet is 192.168.100.0/24 — hosts 192.168.100.1 to 192.168.100.254, broadcast at 192.168.100.255. Position 30 puts this address low in the range but not at its very start. Many routers begin their DHCP pool somewhere between .2 and .100, so .30 commonly lands on an early or long-lived lease. It is also a popular spot for hand-assigned static addresses on networks where an administrator reserves the bottom of the range for infrastructure such as a switch, NAS or wireless controller.

Visitors typically reach this page after spotting 192.168.100.30 in a connected-devices list or a configuration file and wanting to identify what sits behind it.

Block192.168.0.0/16
Netmask255.255.0.0
Subnet192.168.100.0/24
Usable192.168.100.1 – 192.168.100.254

Whois information for 192.168.0.0/16
#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 192.168.0.0 - 192.168.255.255
CIDR: 192.168.0.0/16
NetName: PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle: NET-192-168-0-0-1
Parent: NET192 (NET-192-0-0-0-0)
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1994-03-15
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/192.168.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

Other documented addresses in 192.168.100.0/24

The 192.168.100.0/24 subnet runs from 192.168.100.1 to 192.168.100.254, with 192.168.100.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.

Most looked up in this subnet

192.168.100.4 192.168.100.1 192.168.100.5 192.168.100.3 192.168.100.6 192.168.100.2 192.168.100.7 192.168.100.8

All addresses we cover here
192.168.100.1 192.168.100.2 192.168.100.3 192.168.100.4 192.168.100.5 192.168.100.6 192.168.100.7 192.168.100.8 192.168.100.9 192.168.100.10 192.168.100.11 192.168.100.12 192.168.100.13 192.168.100.14 192.168.100.15 192.168.100.16 192.168.100.17 192.168.100.18 192.168.100.19 192.168.100.20 192.168.100.21 192.168.100.22 192.168.100.23 192.168.100.24 192.168.100.25 192.168.100.26 192.168.100.27 192.168.100.29 192.168.100.32 192.168.100.33 192.168.100.34 192.168.100.36 192.168.100.37 192.168.100.39 192.168.100.40 192.168.100.47 192.168.100.52 192.168.100.53 192.168.100.54 192.168.100.56 192.168.100.57 192.168.100.58 192.168.100.62 192.168.100.68 192.168.100.72 192.168.100.75 192.168.100.76 192.168.100.81 192.168.100.83 192.168.100.99 192.168.100.102 192.168.100.104 192.168.100.117 192.168.100.133 192.168.100.136 192.168.100.141 192.168.100.156 192.168.100.164 192.168.100.178 192.168.100.200

255 addresses in this subnet have a page; the most looked-up are listed here.