192.168.100.35 router login

To open the admin panel, type 192.168.100.35 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

192.168.100.35 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

Nothing in the record ties a default username and password to 192.168.100.35. Since private addresses are recycled endlessly across unrelated networks, a credential pair that works at this address on one LAN is irrelevant on the next. Determine the make and model of the device first, then read the defaults from the hardware itself — the rear or underside label, a card in the original packaging, or the model's manual. Provider-installed equipment commonly uses credentials documented by the provider rather than the manufacturer.

How to log in to your router

  1. Type 192.168.100.35 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 192.168.100.35, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

Recovering access is worth attempting in order of increasing damage. Try a browser with cookies cleared or a private window, check whether a companion app holds the credentials, and connect by cable to rule out a wireless issue. Only then consider a factory reset, which erases the device's entire configuration and returns its password to whatever is printed on the label. On most equipment that means holding a recessed button for a sustained period while the unit is powered; the exact duration and the light pattern that signals success are specific to the model and listed in its documentation.

As an RFC 1918 address, 192.168.100.35 belongs to 192.168.0.0/16 — 65,536 addresses under the mask 255.255.0.0, set aside so that private networks can number themselves without asking anyone's permission. It is the consumer block: nearly every home router, mobile hotspot and small office access point ships a default gateway inside it, which is why it is the range most people encounter. The flip side of that convenience is that the address is anonymous by design; it identifies a position on a network, never a location or an organisation.

Split the traditional way, the address lives in 192.168.100.0/24, with hosts at 192.168.100.1 through 192.168.100.254 and broadcast at 192.168.100.255. Host 35 is a low-to-middle position and not one routers usually occupy. Networks that reserve the first few dozen addresses for fixed infrastructure sometimes place equipment here deliberately, while networks that start their DHCP pool early will simply lease it to whichever client connects.

Most visitors are trying to identify a device: something appeared at 192.168.100.35 in a scan, a firewall log or a router's client list, and they want to open its interface or confirm it belongs on the network.

Block192.168.0.0/16
Netmask255.255.0.0
Subnet192.168.100.0/24
Usable192.168.100.1 – 192.168.100.254

Whois information for 192.168.0.0/16

#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 192.168.0.0 - 192.168.255.255
CIDR: 192.168.0.0/16
NetName: PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle: NET-192-168-0-0-1
Parent: NET192 (NET-192-0-0-0-0)
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1994-03-15
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/192.168.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN