192.168.100.66 router login
To open the admin panel, type 192.168.100.66 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
192.168.100.66 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
No default username and password pair is documented for 192.168.100.66, and inventing one would only waste attempts. Each device carries its own: look at the label on the underside or rear panel, the quick-start card that came in the box, or the manual for that exact model number. Equipment supplied by an internet provider often has its credentials printed in the account paperwork instead.
How to log in to your router
Type 192.168.100.66 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 192.168.100.66, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
When the password has been changed and forgotten, the remaining route is the recessed reset button, commonly held for ten to thirty seconds with the unit powered on. A factory reset is not free: custom configuration, port forwards and DHCP reservations are erased, and the Wi-Fi network name and key revert to the values shown on the label, so every client has to be reconnected.
192.168.100.66 belongs to 192.168.0.0/16, the private range described by RFC 1918 and carried under the mask 255.255.0.0 across 65,536 addresses. That block is the consumer one: nearly every home router, mobile hotspot and small office access point ships a default gateway inside it, which is why it is the range most people encounter. Because the space is private, the same address exists on countless unrelated networks and is never routed across the public internet.
Within its own segment, 192.168.100.0/24, the usable hosts run from 192.168.100.1 to 192.168.100.254 and 192.168.100.255 is reserved for broadcast. Host number 66 sits inside the range a DHCP server normally leases out rather than the low position a gateway usually takes, so a visitor here is more often chasing a client device, a port-forward target or an entry in a connected-devices list than a router login screen.
Whois information for 192.168.0.0/16
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 192.168.0.0 - 192.168.255.255
CIDR: 192.168.0.0/16
NetName: PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle: NET-192-168-0-0-1
Parent: NET192 (NET-192-0-0-0-0)
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1994-03-15
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/192.168.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 192.168.100.0/24
The 192.168.100.0/24 subnet runs from 192.168.100.1 to 192.168.100.254, with 192.168.100.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
255 addresses in this subnet have a page; the most looked-up are listed here.