10.0.0.100 router login
To open the admin panel, type 10.0.0.100 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.0.0.100 router passwords
One default username and password pair has been reported for devices answering on 10.0.0.100.
| Username / Password | Percentage |
|---|---|
| blank / blank | 100% |
No username and password pair is documented for 10.0.0.100; the single reported outcome is a login requiring no credentials, which typically describes an interface left open on the local network or a device with nothing to sign into. That is an observation rather than a promise, and an open management page is worth securing if you own the device. Should a prompt appear, use the defaults printed on that unit's own label or given in its manual, and for equipment issued by a provider or employer, the documentation that accompanied it.
How to log in to your router
Type 10.0.0.100 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.0.0.100, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
Confirm what answers at 10.0.0.100 before resetting anything, since round addresses in this subnet are frequently assigned by hand to servers, storage or printers whose stored data matters more than their password. A lease table or ARP entry will tie the address to a MAC and hostname. If the device is yours and access cannot be recovered, follow the reset procedure its own documentation describes. Expect a reset to clear the configuration completely: network settings, shares, user accounts, scheduled tasks and any customisation revert to factory state, and on some devices stored content is removed as well.
10.0.0.100 belongs to 10.0.0.0/8, the largest private range RFC 1918 provides. At a 255.0.0.0 mask it holds 16,777,216 addresses, which is why it is subnetted far below /8 in practice. It is the usual choice for corporate and campus networks, provider-managed customer equipment, carrier-grade gear, VPN pools and container networking, and a smaller number of consumer routers default into its lowest subnet as an alternative to 192.168 numbering. Private space is unallocated and reused freely, so the address identifies no organisation or place.
The subnet here is 10.0.0.0/24, the very first /24 in the block, with usable hosts from 10.0.0.1 to 10.0.0.254 and 10.0.0.255 as the broadcast address. All 254 positions are documented, reflecting how heavily this particular subnet is used.
A final octet of 100 is notable mainly as a round number: it is a common starting point for DHCP pools and a favourite for manually assigned servers, printers and network storage. It is not a position gateways commonly take. Visitors normally arrive after finding 10.0.0.100 in a lease list, a mapped drive path or a device's status screen.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.0.0.0/24
The 10.0.0.0/24 subnet runs from 10.0.0.1 to 10.0.0.254, with 10.0.0.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
255 addresses in this subnet have a page; the most looked-up are listed here.