10.0.0.102 router login

http://10.0.0.102 ↗

To open the admin panel, type 10.0.0.102 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

10.0.0.102 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

No default username and password pair is documented for 10.0.0.102, and none should be guessed. Private addresses are assigned by whoever runs the network, so the sign-in details belong to whatever device happens to hold the lease rather than to the number itself.

If the address does answer on a web port, identify the hardware first, then look for its own defaults: the printed label on the underside or rear panel, the quick-start card in the box, the manufacturer's manual for that model, or the documentation supplied by an ISP or IT department when the equipment was issued.

How to log in to your router

  1. Type 10.0.0.102 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 10.0.0.102, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

If credentials for the device at 10.0.0.102 are unknown, try a password manager, browser-saved logins and any handover notes before touching the hardware. A factory reset is the last resort because it commonly wipes the whole configuration: static addressing, wireless names and keys, port forwarding, VLAN membership and access rules all revert to shipped defaults, and the device may reappear on a different address afterwards.

The usual method is a recessed reset button held for several seconds while powered on, but the exact duration and behaviour vary by model, so check that model's own instructions first.

10.0.0.102 sits inside 10.0.0.0/8, the largest of the three private ranges reserved by RFC 1918. With a netmask of 255.0.0.0 the block holds 16,777,216 addresses, far more than any single network would ever flatten into one broadcast domain, so it is almost always carved into much smaller pieces. It turns up in corporate and campus networks, ISP-managed customer equipment, carrier-grade gear, VPN address pools and container platforms. Because the space is private, the same number is in simultaneous use on countless unrelated networks, and nothing about the address identifies a company, a country or a provider.

The surrounding subnet here is 10.0.0.0/24, which offers 10.0.0.1 through 10.0.0.254 for hosts and reserves 10.0.0.255 as the broadcast address. At position 102 the address sits in the middle third of that range, well away from the low numbers that administrators usually hand to routers and firewalls, which is where dynamically assigned client leases typically land.

Most people arriving here have read 10.0.0.102 off a DHCP client list, an ARP table, a connected-devices screen or a network scan, and want to know which machine holds it and whether it can be opened in a browser.

Block10.0.0.0/8
Netmask255.0.0.0
Subnet10.0.0.0/24
Usable10.0.0.1 – 10.0.0.254

Whois information for 10.0.0.0/8
#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent:  ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

Other documented addresses in 10.0.0.0/24

The 10.0.0.0/24 subnet runs from 10.0.0.1 to 10.0.0.254, with 10.0.0.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.

Most looked up in this subnet

10.0.0.5 10.0.0.8 10.0.0.253 10.0.0.251 10.0.0.245 10.0.0.36 10.0.0.254 10.0.0.24

All addresses we cover here
10.0.0.2 10.0.0.4 10.0.0.5 10.0.0.6 10.0.0.7 10.0.0.8 10.0.0.9 10.0.0.10 10.0.0.12 10.0.0.14 10.0.0.15 10.0.0.16 10.0.0.18 10.0.0.24 10.0.0.25 10.0.0.26 10.0.0.27 10.0.0.32 10.0.0.33 10.0.0.35 10.0.0.36 10.0.0.39 10.0.0.40 10.0.0.42 10.0.0.43 10.0.0.44 10.0.0.45 10.0.0.46 10.0.0.52 10.0.0.53 10.0.0.54 10.0.0.55 10.0.0.56 10.0.0.59 10.0.0.63 10.0.0.64 10.0.0.65 10.0.0.66 10.0.0.67 10.0.0.71 10.0.0.75 10.0.0.76 10.0.0.77 10.0.0.81 10.0.0.85 10.0.0.90 10.0.0.91 10.0.0.95 10.0.0.97 10.0.0.124 10.0.0.143 10.0.0.172 10.0.0.181 10.0.0.245 10.0.0.249 10.0.0.250 10.0.0.251 10.0.0.252 10.0.0.253 10.0.0.254

255 addresses in this subnet have a page; the most looked-up are listed here.