10.0.0.104 router login
To open the admin panel, type 10.0.0.104 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.0.0.104 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
There is no recorded default login for 10.0.0.104. Treating any published credential list as applicable to an address rather than to a specific model is how people end up locked out or misconfiguring the wrong box. If the device at this address does ask for a username and password, the shipped values are on its physical label or in the manual for that model; where an internet provider supplied and configured the hardware, the provider's documentation or support desk is the authoritative source.
How to log in to your router
Type 10.0.0.104 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.0.0.104, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
Rule out the simple explanation first: check your default gateway, and if it is not 10.0.0.104, administration happens somewhere else and no reset is needed. When the address really is a device you own and cannot access, weigh the cost before wiping it, because a reset removes wireless credentials, address reservations, firewall rules and any customisation, and on business equipment can also detach it from central management. Save or photograph the configuration first, then follow the reset method documented for that particular model.
Addresses beginning with 10 belong to 10.0.0.0/8, a private range of 16,777,216 addresses defined by netmask 255.0.0.0 and reserved by RFC 1918 for networks that are not exposed to the public internet. Its size makes it the default choice for corporate and campus networks, provider-managed customer equipment, VPN address pools and orchestration platforms, all of which break it into much smaller subnets before use. Because the space is reusable without registration, 10.0.0.104 has no single owner and no geography attached to it.
The subnet in question, 10.0.0.0/24, supports 254 usable hosts between 10.0.0.1 and 10.0.0.254, ending with the broadcast address 10.0.0.255. Host 104 falls comfortably inside the range most routers hand out automatically, which points to a dynamically assigned endpoint rather than to gateway or server infrastructure.
Typical reasons for looking this address up include tracing an unfamiliar entry in a connected-devices list, working out why a browser request to it times out, or checking whether it is the right place to configure a network. In most setups the configuration interface is not here.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.0.0.0/24
The 10.0.0.0/24 subnet runs from 10.0.0.1 to 10.0.0.254, with 10.0.0.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
255 addresses in this subnet have a page; the most looked-up are listed here.