10.0.0.106 router login
To open the admin panel, type 10.0.0.106 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.0.0.106 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
No default username and password pair is documented for 10.0.0.106, and inventing one would be worse than useless, since credentials belong to a device model, not to a private address that any network can reuse. Look instead at the equipment itself. Many routers, access points, cameras and network appliances print their factory login on a sticker or label on the underside or rear panel, sometimes alongside a default Wi-Fi key. Failing that, check the printed quick-start guide, the manufacturer's support page for that exact model number, or, on ISP-supplied equipment, the provider's own documentation or account portal.
How to log in to your router
Type 10.0.0.106 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.0.0.106, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
If the administration page loads but the credentials have been changed and forgotten, a factory reset is usually the only route back in. Understand the cost before pressing anything: a reset commonly clears the Wi-Fi name and password, port forwarding, DHCP reservations, firewall rules, parental controls and any ISP connection settings such as PPPoE usernames, so the network has to be rebuilt afterwards. On many devices the method is a recessed button held for roughly ten to thirty seconds while powered on. Because no specific vendor is known to ship 10.0.0.106 as a default gateway, confirm the exact procedure and hold time in the documentation for your own model, and export a configuration backup first if the interface still allows it.
10.0.0.106 is a private IPv4 address drawn from 10.0.0.0/8, the largest of the three RFC 1918 ranges. With a netmask of 255.0.0.0, that block spans 16,777,216 addresses, none of which are routable across the public internet. Because the space is private, the same address exists independently on countless unrelated networks at the same time, and it carries no owner, registrant, ISP or geographic location of its own. Any information about 10.0.0.106 is information about the one network you are currently attached to.
In practice a /8 is almost never deployed whole. It is subnetted far below its native size, and 10.0.0.106 falls in the 10.0.0.0/24 segment, where 10.0.0.1 through 10.0.0.254 are usable and 10.0.0.255 is the broadcast address. As host number 106 of 254, it sits in the middle of the range rather than at the low positions where routers and gateways are commonly configured, so it is more often a client or server lease than the network's own edge device. The 10.0.0.0/8 block is widespread in corporate and campus networks, ISP-managed customer equipment, carrier-grade infrastructure, VPN address pools and container or orchestration networks.
Most people arriving here have typed 10.0.0.106 into a browser and want to know what answered, or want to reach a device's administration page.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.0.0.0/24
The 10.0.0.0/24 subnet runs from 10.0.0.1 to 10.0.0.254, with 10.0.0.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
255 addresses in this subnet have a page; the most looked-up are listed here.