10.0.0.126 router login
To open the admin panel, type 10.0.0.126 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.0.0.126 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
No default username and password pair is documented for this specific address, and guessing at one is unhelpful. Because private addresses are assigned by the local network rather than by a manufacturer, credentials depend entirely on the device answering here. Check the printed label on the unit itself, the model's manual, or the documentation supplied by an ISP for equipment it installed and manages.
How to log in to your router
Type 10.0.0.126 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.0.0.126, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
If the login is unknown and the label values have been changed, a factory reset via the recessed button, usually held for around ten to thirty seconds while powered on, restores the defaults on many devices. The cost is real: custom configuration is erased, including port forwarding, static leases and any DHCP changes, and the Wi-Fi network name and password revert to the values printed on the label, so every connected device must be rejoined.
10.0.0.126 sits inside 10.0.0.0/8, the largest of the three RFC 1918 private ranges, covering 16,777,216 addresses under the netmask 255.0.0.0. That block is common in corporate and campus networks, ISP-managed CPE, carrier-grade equipment, VPN address pools and container or orchestration networks, where it is almost always subnetted far below /8. Because private space is unallocated and reusable, the same address can exist on countless separate networks at once; it says nothing about location, provider or owner.
In a conventional 10.0.0.0/24 subnet the usable hosts run from 10.0.0.1 to 10.0.0.254, with 10.0.0.255 reserved as the broadcast address. As host 126, this address falls well inside the pool rather than at the .1 or .254 edges where gateways usually sit, so it more often belongs to a DHCP-assigned client, printer, camera, NAS or access point. Most people looking it up are trying to identify a device found on their own network or reach its management page.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.0.0.0/24
The 10.0.0.0/24 subnet runs from 10.0.0.1 to 10.0.0.254, with 10.0.0.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
255 addresses in this subnet have a page; the most looked-up are listed here.