10.0.0.141 router login
To open the admin panel, type 10.0.0.141 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.0.0.141 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
No default username and password pair is recorded for 10.0.0.141, and none should be assumed. The address sits at a host position rather than a gateway position, so there is no single class of equipment behind it and no shared factory login to quote.
If you are trying to sign in to whatever answers at this address, identify the hardware first, then read its own defaults from the label printed on the underside or rear panel, from the quick-start card in the box, or from the manual for that exact model. Equipment supplied by an internet provider often has its credentials in the welcome documentation or the provider's account app instead.
How to log in to your router
Type 10.0.0.141 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.0.0.141, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
A factory reset is the last resort rather than the first move. It clears the whole configuration: wireless network names and keys, port forwarding, firewall rules, DHCP reservations, VLAN assignments and any provisioning applied by an internet provider. On managed equipment it can also drop the device off the network until it is re-enrolled.
Since no specific vendor is known to ship this address, follow the reset procedure in the documentation for your own device. The common pattern is a recessed button held with a pin for roughly ten to thirty seconds while the unit is powered. Note that after a reset the host is unlikely to return to 10.0.0.141, because that lease will normally be reissued from the pool.
10.0.0.141 is a private IPv4 address drawn from 10.0.0.0/8, the largest of the three RFC 1918 ranges. With a netmask of 255.0.0.0 the block holds 16,777,216 addresses, and in practice it is almost never used as a flat /8. It is the range you meet in corporate and campus networks, in ISP-managed customer premises equipment, in carrier-grade gear, in VPN address pools and in container and orchestration networks, all of which subnet it far below its natural boundary. Because the block is private, the same address is in use on countless unrelated networks at the same time and carries no owner, operator or location of its own.
Within the /24 it is usually treated as part of, 10.0.0.0/24, the usable host range runs from 10.0.0.1 to 10.0.0.254 and 10.0.0.255 is the broadcast address. This address occupies host position 141, which sits well away from the low positions administrators normally reserve for gateways and infrastructure. On many networks a number in that region falls inside the DHCP pool, so the machine answering at 10.0.0.141 is more often a leased client — a laptop, phone, printer, camera or storage box — than a router interface.
Most people arriving here have seen 10.0.0.141 in a DHCP lease table, an ARP listing, a firewall log or a device discovery scan and want to know what kind of host it identifies.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.0.0.0/24
The 10.0.0.0/24 subnet runs from 10.0.0.1 to 10.0.0.254, with 10.0.0.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
255 addresses in this subnet have a page; the most looked-up are listed here.