10.0.0.17 router login
To open the admin panel, type 10.0.0.17 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.0.0.17 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
There is no documented default username and password for 10.0.0.17. Addresses in 10.0.0.0/8 are heavily used by managed and enterprise equipment, where credentials are set during deployment and factory defaults have usually been replaced long before anyone else needs them.
On a corporate or campus network the right move is to ask whoever administers it rather than to try passwords. On equipment you own, read the label on the chassis, the bundled quick-start sheet or the vendor's published manual for that model.
How to log in to your router
Type 10.0.0.17 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.0.0.17, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
Access recovery on a 10-space host depends on who controls it. If the device is managed centrally, a console or out-of-band connection is normally the sanctioned route, and repeated login attempts may trip an account lockout or raise an alert.
A factory reset is expensive here. Enterprise and infrastructure equipment carries VLAN definitions, routing configuration, certificates and access rules that no sticker will restore, and a reset device may drop off the network entirely because it reverts to a default address outside the production subnet. Export a configuration backup first wherever the platform allows it.
10.0.0.17 comes out of 10.0.0.0/8, the largest of the RFC 1918 private ranges. With the mask 255.0.0.0 it covers 16,777,216 addresses, and that size is the point: corporate and campus networks, ISP-managed customer equipment, carrier gear, VPN address pools and container or orchestration networks all carve it into much smaller pieces rather than using it flat.
Read as part of 10.0.0.0/24, the address is host 17 of a subnet running from 10.0.0.1 to 10.0.0.254 with broadcast at 10.0.0.255. The actual mask in use may well be wider or narrower than a /24, since the /8 is subnetted at whatever depth the network designer chose. Position 17 is a low but unremarkable number, below where many DHCP pools start and inside the band administrators often set aside for static assignments to servers, switches, printers or access points.
People reaching this address are usually chasing a specific host on a private network, whether that is a device they need to configure, an unexpected entry in an ARP table, or an address handed out by a VPN client.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.0.0.0/24
The 10.0.0.0/24 subnet runs from 10.0.0.1 to 10.0.0.254, with 10.0.0.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
255 addresses in this subnet have a page; the most looked-up are listed here.