10.0.0.216 router login
To open the admin panel, type 10.0.0.216 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.0.0.216 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
There is no known factory username and password for 10.0.0.216, and none will be invented here. Determine what responds at the address before worrying about logging in: a service banner, an open port or an HTTPS certificate name will usually reveal the product. Once identified, look for the defaults printed on the device label or documented in its manual. In an environment managed by an IT department, factory credentials may have been replaced on day one, in which case only that team can restore access.
How to log in to your router
Type 10.0.0.216 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.0.0.216, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
Recovering access at 10.0.0.216 starts with the least destructive option: a password reset from a directory service, a management platform or a recovery account. Only if those fail does a hardware reset make sense. Doing so returns the unit to its out-of-box state, so static addressing, cluster or failover membership, certificates and audit history are lost, and the address itself will very likely change once DHCP takes over again. No manufacturer is known to use this address as a default gateway, so follow the documented procedure for the device you have.
Sitting inside 10.0.0.0/8 under the mask 255.0.0.0, the address 10.0.0.216 is private and non-routable on the public internet. The largest RFC 1918 block. Common in corporate and campus networks, ISP-managed CPE, carrier-grade equipment, VPN address pools and container/orchestration networks, where the address space is subnetted far below /8. Its 16,777,216 addresses can be reused by any organisation at the same time, which rules out attributing it to a company, registrant or location.
Locally it belongs to 10.0.0.0/24: hosts 10.0.0.1 through 10.0.0.254, broadcast 10.0.0.255. Host position 216 sits high in the range, close to the tail. Administrators often reserve the upper end of a /24 for a purpose, whether that is a DHCP pool that fills from the top down, a set of static reservations for servers and appliances, or floating addresses used by failover pairs and load balancers. Equally, on a busy wireless network it may simply be a recently issued lease.
People searching this address are typically tracing a device seen in monitoring output, an access log or a router's client list and want to identify it and reach its management page.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.0.0.0/24
The 10.0.0.0/24 subnet runs from 10.0.0.1 to 10.0.0.254, with 10.0.0.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
255 addresses in this subnet have a page; the most looked-up are listed here.