10.0.0.240 router login
To open the admin panel, type 10.0.0.240 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.0.0.240 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
There is no documented default login for 10.0.0.240, so none is offered here. Find the credentials that belong to the device itself: they are usually silkscreened or stickered on the chassis, repeated in the setup leaflet, and listed in the model's manual. On business hardware the initial account is often created during first-run setup, in which case no factory pair exists at all.
How to log in to your router
Type 10.0.0.240 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.0.0.240, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
Losing the password normally leaves a factory reset as the fallback, triggered by holding the recessed button through a full power cycle or reboot. Understand what that erases: the entire configuration, including any static assignment that put the device at this address in the first place. Wi-Fi capable units revert to the network name and key printed on their label, and clients will not reconnect on their own.
10.0.0.240 is a private address from 10.0.0.0/8, the widest RFC 1918 allocation at 16,777,216 addresses under a 255.0.0.0 netmask. Networks that use it — corporate and campus environments, ISP-managed CPE, carrier equipment, VPN pools, container platforms — subdivide it heavily rather than running a flat /8. In practice this address lives in 10.0.0.0/24, a 254-host segment running from 10.0.0.1 to 10.0.0.254, closed by the broadcast address 10.0.0.255.
A host number of 240 sits near the top of that segment. Administrators sometimes park fixed-address infrastructure such as printers, controllers or access points in the upper reaches of a subnet, deliberately above the DHCP pool; other times the pool simply extends that far. It is not a conventional gateway position. Visitors typically arrive here after a scan or a lease table surfaced the address and they want to understand what it represents before connecting to it. Every one of the 254 addresses in this subnet has its own entry.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.0.0.0/24
The 10.0.0.0/24 subnet runs from 10.0.0.1 to 10.0.0.254, with 10.0.0.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
255 addresses in this subnet have a page; the most looked-up are listed here.