10.0.0.248 router login

To open the admin panel, type 10.0.0.248 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

10.0.0.248 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

No credential pair is documented for 10.0.0.248, and none is implied by the address. Two networks using 10.0.0.0/24 will have entirely unrelated devices at this position, so any password that worked elsewhere is coincidence.

Start from the hardware. Consumer and small business units usually print an administrative account, and increasingly a unique per-unit password, on a label attached to the case. Where the label is missing, the product manual and the manufacturer's support site for that model number are the dependable sources, as is the documentation provided with equipment supplied by a network operator.

How to log in to your router

  1. Type 10.0.0.248 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 10.0.0.248, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

Recovering access without the password normally means a factory reset, and the cost is total: the device returns to shipping defaults, losing its network settings, static address, security configuration, stored data in some cases, and every account created on it. If it serves other systems, expect an outage until it is rebuilt.

As no vendor is documented for this address, follow the reset method for the model in hand. A recessed button held for roughly ten to thirty seconds while powered is common, though some equipment resets from a console prompt or a physical jumper. Export the configuration first if you still have access.

10.0.0.248 sits in 10.0.0.0/8, the largest of the three RFC 1918 ranges. A 255.0.0.0 netmask gives it 16,777,216 addresses, which is why it appears in corporate and campus networks, ISP-managed customer equipment, carrier-grade systems, VPN address pools and container networking, almost always subnetted far below /8. Like all private space it is unallocated, so no organisation, provider or country can be attached to it.

The local segment is 10.0.0.0/24. Usable addresses run 10.0.0.1 through 10.0.0.254, and 10.0.0.255 is the broadcast address. This particular address, position 248, sits near the very top of the segment. That upper region is a common place for administrators to park static assignments deliberately kept above the DHCP pool, and it is also where some DHCP servers finish handing out leases on a busy network.

A device holding a high address like this is often something fixed rather than transient: a printer, a network attached storage box, a wireless access point, a camera recorder or a piece of building equipment. Visitors typically want to know which of those it is, or to open whatever web interface it presents on this address.

Block10.0.0.0/8
Netmask255.0.0.0
Subnet10.0.0.0/24
Usable10.0.0.1 – 10.0.0.254

Whois information for 10.0.0.0/8

#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent:  ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

Other documented addresses in 10.0.0.0/24

The 10.0.0.0/24 subnet runs from 10.0.0.1 to 10.0.0.254, with 10.0.0.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.

Most looked up in this subnet

All addresses we cover here

255 addresses in this subnet have a page; the most looked-up are listed here.