10.0.0.28 router login

To open the admin panel, type 10.0.0.28 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

10.0.0.28 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

No default sign-in details are on record for this address, and none are supplied. What sits at 10.0.0.28 is a matter of local configuration, so the applicable credentials belong to that particular device. If the network is administered by someone else, their asset records or documentation are the correct place to look. If the hardware is yours, the factory account is normally on a label attached to the case, or listed in the manual for the exact model. Equipment provisioned by an installer or a provider often has a password that replaced the factory one entirely.

How to log in to your router

  1. Type 10.0.0.28 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 10.0.0.28, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

Check first whether the device is doing work that others depend on. Servers, print controllers and access points reserved at low host numbers often serve a whole network, and clearing them to defaults will move them off 10.0.0.28 and interrupt everyone using them.

If a reset is unavoidable, capture the current configuration beforehand where the device can export it, and note its address, mask and gateway on paper. After the reset the unit will come up on its shipping defaults, with hostname, static addressing, service settings and access controls gone, and will need to be readdressed before it is reachable again.

10.0.0.28 is part of 10.0.0.0/8, the largest private allocation in RFC 1918. Its netmask of 255.0.0.0 covers 16,777,216 addresses, kept entirely inside private networks and never carried across the public internet. Because the whole block can be adopted by anyone without registration, questions about its owner, its provider or where it is located have no answer; identical addresses run concurrently on countless independent networks.

The block's usual settings are corporate and campus networks, provider-managed customer equipment, carrier-grade systems, VPN address pools and container and orchestration platforms, each dividing it into far smaller pieces than the /8 boundary. The subnet in play here is 10.0.0.0/24, with 10.0.0.1 to 10.0.0.254 available for hosts and 10.0.0.255 reserved for broadcast. Position 28 falls in the low-to-middle part of the range and is not a gateway address by convention.

Addresses at this end of a /24 are frequently handed out early in a DHCP scope or reserved for infrastructure such as servers, printers, controllers or access points. Most people searching for this address want to identify what answers there, or to reach a management interface someone told them lives at that number.

Block10.0.0.0/8
Netmask255.0.0.0
Subnet10.0.0.0/24
Usable10.0.0.1 – 10.0.0.254

Whois information for 10.0.0.0/8

#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent:  ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

Other documented addresses in 10.0.0.0/24

The 10.0.0.0/24 subnet runs from 10.0.0.1 to 10.0.0.254, with 10.0.0.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.

Most looked up in this subnet

All addresses we cover here

255 addresses in this subnet have a page; the most looked-up are listed here.