10.0.0.31 router login

To open the admin panel, type 10.0.0.31 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

10.0.0.31 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

No credential pair is documented for anything at 10.0.0.31, so this page will not suggest one. The correct source is the device: check the printed label for an admin account and initial password, the setup leaflet packaged with it, or the vendor manual matched to the exact model and hardware revision. Managed or leased equipment may have its defaults recorded in provider documentation rather than on the case.

How to log in to your router

  1. Type 10.0.0.31 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 10.0.0.31, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

Locked out with no known password, you are left with a factory reset, normally a pinhole button held down while the unit runs. Be clear about the cost first: the reset erases static IP settings, routing and firewall configuration and any reservations, and the wireless name and password return to the printed defaults. On devices reachable only over Wi-Fi, plan to reconnect using the label values immediately afterwards.

10.0.0.31 belongs to 10.0.0.0/8, the widest private allocation in RFC 1918, with a netmask of 255.0.0.0 and room for 16,777,216 addresses. Networks that use it almost never use it whole; the space is subnetted aggressively for departments, sites, VPN clients and container bridges. The containing subnet here is 10.0.0.0/24, whose usable host addresses run 10.0.0.1 to 10.0.0.254 and whose broadcast address is 10.0.0.255.

Host 31 is a low position, and low positions are frequently handed out as static assignments or DHCP reservations for printers, network storage, access points and cameras, though the number carries no fixed meaning. It is not one of the positions commonly used for a default gateway. Someone looking this address up is usually trying to open a management page they were told sits here, or to work out which fixed-address device on the LAN it corresponds to.

Block10.0.0.0/8
Netmask255.0.0.0
Subnet10.0.0.0/24
Usable10.0.0.1 – 10.0.0.254

Whois information for 10.0.0.0/8

#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent:  ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

Other documented addresses in 10.0.0.0/24

The 10.0.0.0/24 subnet runs from 10.0.0.1 to 10.0.0.254, with 10.0.0.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.

Most looked up in this subnet

All addresses we cover here

255 addresses in this subnet have a page; the most looked-up are listed here.