10.0.0.80 router login
To open the admin panel, type 10.0.0.80 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.0.0.80 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
There are no documented default username and password pairs for 10.0.0.80, and no vendor is known to ship this address as a factory default, so any credential pair published for it would be guesswork. Because a mid-range host address like this is typically assigned rather than preset, the defaults depend entirely on the specific device answering, not on the address.
Check the label or sticker on the device itself, which commonly prints the default account, password or PIN. Failing that, consult the printed or downloadable manual for the exact model, or your ISP's documentation if the equipment was supplied by them.
How to log in to your router
Type 10.0.0.80 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.0.0.80, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
If the login credentials are unknown and no label or manual is available, first confirm what device is actually answering at 10.0.0.80 — checking the DHCP client list on your gateway, or the ARP table on a computer on the same segment, often identifies it. Since no vendor is documented for this address, follow the reset procedure in that device's own documentation rather than a generic one.
A factory reset is a last resort. It commonly erases custom configuration: static assignments, wireless names and keys, port forwarding, VLANs, firewall rules and user accounts. The device may also revert to a different management address, so plan to reconfigure it from scratch.
10.0.0.80 is a private IPv4 address from 10.0.0.0/8, the largest of the three RFC 1918 ranges, holding 16,777,216 addresses under a 255.0.0.0 netmask. Because RFC 1918 space is not routed on the public internet, this address is not allocated to any organisation and carries no location, ISP or owner. The same address exists independently inside countless separate networks, and nothing about the number itself identifies whose network you are on. The 10/8 block is common in corporate and campus networks, ISP-managed CPE, carrier-grade equipment, VPN address pools and container or orchestration networks, where it is almost always subnetted far below /8 into smaller segments.
Within the /24 segment 10.0.0.0/24, usable host addresses run from 10.0.0.1 to 10.0.0.254, with 10.0.0.255 reserved as the broadcast address. 10.0.0.80 sits at host position 80, in the middle of that range rather than at the low positions such as .1 or .254 where gateways are conventionally placed. That position is more consistent with a DHCP-assigned or statically reserved host than with the router itself.
Most people looking up this address are trying to reach a login page on a device that answered at 10.0.0.80 — often a network appliance, access point, camera, NAS, printer or server rather than the main gateway.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.0.0.0/24
The 10.0.0.0/24 subnet runs from 10.0.0.1 to 10.0.0.254, with 10.0.0.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
255 addresses in this subnet have a page; the most looked-up are listed here.